CNC Fabrication

CNC FABRICATION™ 94.5-03 STAGE 1 VALVE SPRING KIT MODEL/YEAR(S): 1994.5-2003 ENGINE SIZE: 7.3L Great mild upgrade over stock valve springs for around for under a 500hp engine.  OD: 1.354" ID:  0.940" SEAT LOAD: 119LBS @1.800" OPEN LOAD: 312LBS @1.350" COIL BIND: 1.280" RATE: 458LBS/IN...

Upgrade your 94.5-95 7.3L Powerstroke with this rebuilt Stage 2 High Pressure Oil Pump from CNC Fabrication, LLC. Typically this pump will flow 30% more than a brand new Bosch 99.5-03 pump, which is plenty enough volume to sustain 250/100 hybrid injectors. 250/200's can...

Upgrade your 03-04 6.0L Powerstroke with this Stage 2 High Pressure Oil Pump from CNC Fabrication, LLC MODEL/YEAR(S): 2003-2004 ENGINE SIZE: 6.0L This is our mild performance pump and will outperform our Stage 1 pump by around 30% flow volume. Outfitted with a new...

These CNC Fabrication, LLC remanufactured Mild Street (200/30, 200/80, or 200/100) hybrid injectors will put new life back into your 94.5-03 7.3L Ford Powerstroke. Commonly called a Stage 2 or 3, these "Mild Street" 200cc hybrid injectors will typically produce around 450-500hp with proper...

Introducing the latest upgrade for your 98.5-03 7.3L Ford Powerstroke.  CNC Fabrication 4R100 transmission cooler bypass fittings. These fittings have been designed to replace your factory bypass tube that is known to fail and cause overheating issues in your transmission. Crafted from high-quality 12L-14...

CNC Fabrication™ 94.5-03 Stage 2 Beehive Valve Spring Kit MODEL/YEAR(S): 1994.5-2003 ENGINE SIZE: 7.3L Rev up your engine's performance with the CNC Fabrication™ 94.5-03 Stage 2 Beehive Valve Spring Kit! Tailored for high-performance 7.3L Ford Powerstroke engines over 500hp, this premium valve spring kit...

These billet intake plenums are a nice upgrade over the stock flimsy stamped sheet metal and will not deform the center inlet port when installing your CAC boot clamps. Features: High strength 6061-T6511 aircraft aluminum Bolt/nut kit included Tube of Permatex Ultra Gray RTV...

These CNC Fabrication, LLC remanufactured Stock Plus (160/0) injectors will put new life back into your 94.5-03 7.3L Ford Powerstroke. Commonly called a Stage 1 or AC code High Output injectors, these "Stock Plus" 160/0 injectors will typically produce around 325-375hp with proper supporting...

Upgrade your 1994.5-1997 7.3L Ford Powerstroke with a set of CNC Fabrication, LLC intake plenum boots.  Features: 5-layer aramid reinforced silicone for high temp rating Rated to 180psi Stainless Steel American made T-bolt clamps (not cheap worm gear hose clamps) Direct replacement of factory...

This line is a replacement driver side line for the 94.5  through '03. Fittings are the same style as those used on the 94.5-97 powerstroke engines. All new Genuine Brennan™ fittings  DuPont Teflon™ lining just like OEM Burst pressure rating of 16,000psi Working temperature...

TRUCK YEARS: 1994.5-03 ENGINE TYPE: 7.3L This kit will work great for any horsepower level from stock to well over 1000HP trucks.  It will clear any T4 and T4i turbo mount setup that is currently available and works very well with stacked twin HPOP setup...

This CNC Fabrication main plate girdle will hold the bearing caps on your 94.5-03 7.3L Ford Powerstroke more rigid from higher torque to help prevent block twist and keep your main bearings in line. High strength USA made alloy steel 70,000-80,000psi yield strength CNC...

Introducing the ultimate fuel upgrade for your 03-07 6.0L engine that is equipped with an Odawg Stage 2 intake plenum. The CNC Fabrication 4-Line feed stainless steel fuel line kit! Designed with precision and durability in mind, this kit will take your fuel system...

Upgrade your 1994.5-2003 7.3L Ford Powerstroke with this extreme duty billet steel SFI rated E4OD or 4R100 flexplate from CNC Fabrication, LLC.  Features: Thicker material than our stamped SFI flexplate Black Oxide finish to resist corrosion Fully balanced SFI rated FLEXPLATE INSTALL INSTRUCTIONS

98.5-03 7.3L Replacement Fitting Pack for CNC Fabrication HPO 2 Line Kit - 424024 All new Brennan™ Hydraulic fittings  High quality Viton™ o-rings  ***Free shipping is USPS First Class when ordered alone.*** DOWNLOADABLE INSTALL INSTRUCTIONS INSTALLATION: Disconnect the battery grounds before installation to avoid...

MUST ALREADY HAVE ONE OF THE 4 LINE FEED FUEL BOWL RETAIN KITS TO USE THIS PART. YOU ALSO NEED TO HAVE A FILTER AND REGULATOR FOR THIS TO WORK PROPERLY.  IF YOU DO NOT HAVE A FILTER KIT, PLEASE CHOOSE OURS FROM THE...

7.3L FORD POWERSTROKE INJECTOR DRIVER MODULE (IDM) 140V MODIFICATION **This is an IDM Modification Service ONLY for a known working IDM.  Do NOT send us your bad IDM.** There are many people who have completed this upgrade themselves with great success, but if you...

Replace your rusted 94.5-97 E4OD 7.3L Ford Powerstroke transmissions lines with an upgraded CNC Fabrication stainless steel line kit. This kit is to replace your factory E4OD transmission cooler lines with 5/16" hose barbs to match the factory transmission cooler ports.  NOTE: If you...

These CNC Fabrication, LLC remanufactured Mild Street (238/80, 238/100, or 238/200) hybrid injectors will put new life back into your 94.5-03 7.3L Ford Powerstroke. Commonly called a Stage 3, these "Hot Street" 238cc hybrid injectors will typically produce around 500-550hp with proper supporting modifications...

Here's the solution you were looking for to re-seal your 7.3L HPOP and line fittings. This will re-seal all 6 fittings on our 3 line HPOP Line kits along with the rear construction port and passenger side construction port on the pump. This kit...