7.3 Ford Powerstroke Glowplug Relay  Features: VOLTAGE: 12V CONTINUOUS AMPS: 150A SURGE AMPS: 800A CONDITION: NEW MOUNTING: FLAT 180 (F180) DUTY CYCLE: CONTINUOUS 100% CASE MATERIAL: PLASTIC NUMBER OF TERMINALS: 4 *NOTE* These are plow relays and not a true direct replacement. Only one stud...

CNC Fabrication™ L99-03 7.3L Air Intake Heater Plug Shipping: ***Free shipping is USPS First Class when ordered alone.*** MODEL/YEAR(S): 1999-2003 ENGINE SIZE: 7.3L The air intake heater, which is found in ’99.5 and up 7.3 Powerstrokes, blocks close to 20% of the air path in...

Installing these 99.5-03 7.3L Ford Powerstroke CNC Fabrication bushings will help keep you from crushing/distorting the factory stamped sheet metal intake plenums when tightening down your CAC boots.   Includes 2 bushings, one for the passenger side and one for the driver side plenums. ...

These billet intake plenums are a nice upgrade over the stock flimsy stamped sheet metal and will not deform the center inlet port when installing your CAC boot clamps. Features: High strength 6061-T6511 aircraft aluminum Bolt/nut kit included Tube of Permatex Ultra Gray RTV...

Start your 7.3L Powerstroke off right with Genuine Ford/Motorcraft ZD-30 glow plugs! Designed for models from 1994.5 to 2003, these glow plugs ensure reliable performance and smooth starts in any weather. Purchase individually or in a set, they’re recommended by Ford Motor Company for...

Genuine Ford OEM 98.5-03 replacement Under Valve Cover gasket This is a Genuine Ford OEM gasket. In order to replace both sides please choose 2 qty. There actually is a difference in quality compared to Dorman, and you will receive a true Ford part,...

This line is a replacement driver side line for the 94.5  through '03. Fittings are the same style as those used on the 94.5-97 powerstroke engines. All new Genuine Brennan™ fittings  DuPont Teflon™ lining just like OEM Burst pressure rating of 16,000psi Working temperature...

Melling offers quality replacement oil pumps. These pumps are manufactured from high-quality steel with all-new components—and are individually hand-turned and pressure-tested to guarantee that they'll perform as well as OEM to make sure your bearings and vital engine parts are getting the proper amount...

This non-exhaust back pressure valve turbo pedestal eliminates a few problematic oil leaks due to the factory pedestal actuator arm seals that often wear out. Eliminates the back plate seal and actuator arm seal Adding the NON-EBPV (aka High Flow Outlet) lowers EGT's More...

Installing these 94.5 - Early 99 bushings will help keep you from crushing/distorting the factory stamped sheet metal intake plenums when tightening down your CAC boots.  Includes 2 bushings, one for the passenger side and one for the driver side plenums.  Shipping: ***Free shipping is...

Product Description: Under Valve Cover Gasket Kit OEM Numbers: 1826703C1 Use AP63413 injector harness     Make Model Years Engine Model Notes Notes Ford F-250 1998 to 2003 Ford 7.3L Power Stroke   F Series, Excursion, E Series Ford F-350 1998 to 2003 Ford 7.3L Power Stroke   F...

98.5-03 7.3L Replacement Fitting Pack for CNC Fabrication HPO 2 Line Kit - 424024 All new Brennan™ Hydraulic fittings  High quality Viton™ o-rings  ***Free shipping is USPS First Class when ordered alone*** DOWNLOADABLE INSTALL INSTRUCTIONS INSTALLATION: Disconnect the battery grounds before installation to avoid...

Turn your engine bay into a masterpiece with this CNC Fabrication billet engine oil fill tube, designed exclusively for the 7.3L & 6.0L Ford Powerstroke engine. This isn’t just another accessory; it’s a statement piece crafted from premium aircraft-quality billet 6061 aluminum, ensuring durability...

These Proform valve spring height micrometers are inserted over the valve, between the spring seat and retainer, as if they were springs. Their threaded members allow for a quick, accurate measurement of critical valve spring heights.

Our Sleeve Tools are 100% Made in the USA! Machined right here in Northeast Ohio! The 7.3L Power Stroke injectors sit in a brass sleeve that separates the injector, and fuel, from the engine's coolant. These brass sleeves weaken and fatigue from age and...

Revitalize your 1997-2003 Ford 7.3L Powerstroke with the reliable genuine Ford OEM Oil Pan from CNC Fabrication and Diesel performance. Designed as a direct replacement for your rusted, leaking, or damaged oil pan, this genuine Ford oil pan ensures seamless compatibility and top-notch performance....

This CNC Fabrication main plate girdle will hold the bearing caps on your 94.5-03 7.3L Ford Powerstroke more rigid from higher torque to help prevent block twist and keep your main bearings in line. High strength USA made alloy steel 70,000-80,000psi yield strength CNC...

Product Description: Valve Cover Harness  OEM Number:  1830844C93     Make Model Years Engine Model Notes Notes Ford F-250 1998 to 2003 Ford 7.3L Power Stroke   F Series, Excursion, E Series Ford F-350 1998 to 2003 Ford 7.3L Power Stroke   F Series, Excursion, E Series Ford F-450...

NEW Genuine Ford OEM Exhaust Back Pressure Tube Manifold Fitting for 94.5-03 FORD 7.3L Powerstroke Diesel Engines

Alliant Power exhaust back pressure (EBP) tube. OEM Numbers: 1C3Z9D477AA   Make Model Years Engine Model Notes Notes Ford F-250 1999 to 2003 Ford 7.3L Power Stroke   F Series, Excursion, E Series Ford F-350 1999 to 2003 Ford 7.3L Power Stroke   F Series, Excursion, E Series...