Upgrade your 2008-2010 6.4L Ford Powerstroke with a set of CNC Fabrication intercooler boots.  Features: 5 layer aramid reinforced silicone for high temp rating Rated to 180psi Stainless Steel American made T-bolts clamps Reinforcement rings for extra support Direct replacement of factory boots Includes:...

KC TURBO- 300482 This is a new rebuild kit for BorgWarner S300-SXE turbochargers. Kit is exactly as shown in product image. It comes with an upgraded 360 degree thrust bearing. This will work on the following turbos: S357 S360 S362 S363 S364 S366  S369...

KC TURBO- 300483 Features & Details:  Upgraded 360 degree thrust bearing New thrust collar New oil slinger New piston rings New journal bearings & sleeve New compressor cover o-ring & backing plate o-ring Description: This is a new rebuild kit for BorgWarner S400 SXE turbochargers. Kit...

Edges EAS Pressure Sensor is a 0 - 100 PSIg 1/8-inch NPT sensor that plugs directly into the Universal Sensor Input system (p/n 98605). Edges Pressure Sensor comes equipped with the proper wires and connectors to plug right into the Universal Sensor Input system...

BorgWarner S467.7FMW .90 A/R Turbine Housing: .90 A/R T-4 Inlet For 83mm Turbine, S467.7 Volute, Twin Flow 3.5” V-Band (4.21 marmon) Outlet ****This turbine housing is for use with the S467.7 turbo with an 83mm turbine.****  

BorgWarner S300 .91 A/R Turbine Housing: .91 A/R T-4 Inlet For 80mm Turbine, S362, s364.5, S366, S369 Volute, Twin Flow 3.5” V-Band (4.21 marmon) Outlet ****This turbine housing is for use with any s300 turbo supercore with an 80mm turbine.****  

Features & Details:  Up-pipe to Turbo Gaskets Primary Turbo Drain Seal Secondary Turbo Drain Seal Turbo Oil Feed Line Seals Primary to Secondary Turbo Seal Up-pipe to Turbo Mounting Bolts  Fits F250 to F550 Please note that there is no warranty on any DIY...

Features & Details: OEM Replacement fit Rebuild your turbo Regain Lost Power This CHRA Is a factory replacement unit that re-uses your turbine and compressor housings.

OEM Replacement fit Rebuild your turbo Regain Lost Power This CHRA Is a factory replacement unit that re-uses your turbine and compressor housings.

Features & Details: Lighter weight than stock Flows much more Spools faster Stronger & more durable design Fits the low pressure turbo DIY Products Are NOT Covered Under Warranty Description: This is a 100%  drop in upgrade billet wheel, for your low pressure turbo on...

Features & Details: Lighter weight than stock Flows much more Spools faster Stronger & more durable design Fits the high pressure turbo DIY Products Are NOT Covered Under Warranty Description: This is a 100%  drop in upgrade billet wheel, for your high pressure turbo...

FEATURES: 2" DIAMETER BUILT FROM HEAVY DUTY ALUMINIZED STEEL DIRECT BOLT-ON FACTORY REPLACEMENT EGR COMPLIANT MANDREL BENT ALUMINUM CONSTRUCTION GREAT INSURANCE AGAINST FUTURE UP-PIPE FAILURE COMES WITH COMPLETE INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS DOWNLOAD CARB EO# D-763-3

BorgWarner S300 .88 A/R Turbine Housing: .88 A/R T-4 Inlet For 80mm Turbine, S362, s364.5, S366, S369 Open Flow Volute 3.5” V-Band (4.21 marmon) Outlet ****This turbine housing is for use with any s300 turbo supercore with an 80mm turbine.****  

BorgWarner S467.7FMW 1.00 A/R Turbine Housing: 1.00 A/R T-4 Inlet For 83mm Turbine, S467.7 Volute, Twin Scroll 3.5” V-Band (4.21 marmon) Outlet ****This turbine housing is for use with the S467.7 turbo with an 83mm turbine.****  

BorgWarner S300 1.0 A/R Turbine Housing: 1.0 A/R T-4 Inlet For 80mm Turbine, S362, s364.5, S366, S369 Volute, Twin Flow 3.5” V-Band (4.21 marmon) Outlet ****This turbine housing is for use with any s300 turbo supercore with an 80mm turbine.****  

BorgWarner S467.7FMW 1.10 A/R Turbine Housing: 1.10 A/R T-4 Inlet For 83mm Turbine, S467.7 Volute, Twin Scroll 3.5” V-Band (4.21 marmon) Outlet ****This turbine housing is for use with the S467.7 turbo with an 83mm turbine.****  

BorgWarner S400 1.10 A/R Turbine Housing: 1.10 A/R T-4 Inlet For 87mm Turbine Volute, Twin Scroll 3.5” V-Band (4.21 marmon) Outlet ****This turbine housing is for use with the S472, s475, s476, s480, s482 turbo with an 87mm turbine.****  

BorgWarner S400 1.25 A/R Turbine Housing: 1.25 A/R T-4 Inlet For 87mm Turbine, S472, s475, s476, s480, s482 Volute, Twin Scroll 3.5” V-Band (4.21 marmon) Outlet ****This turbine housing is for use with the S472, s475, s476, s480, s482 turbos with an 87mm turbine.****  

BorgWarner S467.7FMW 1.25 A/R Turbine Housing: 1.25 A/R T-4 Inlet For 83mm Turbine, S467.7 Volute, Twin Scroll 3.5” V-Band (4.21 marmon) Outlet ****This turbine housing is for use with the S467.7 turbo with an 83mm turbine.****  

BorgWarner S400 .90 A/R Turbine Housing: .90 A/R T-4 Inlet For 87mm Turbine Volute, Twin Scroll 3.5” V-Band (4.21 marmon) Outlet ****This turbine housing is for use with the S472, S475, S476, S480, S482 turbo with an 87mm turbine.****