CNC Fabrication

Replace your 98.5-03 7.3L Powerstroke high-mileage OEM High Pressure Oil Pump lines with the #1 selling CNC Fabrication™ upgraded HPOP lines! These lines are to replace the typical high mileage expensive leaky OEM HPOP lines that have the STC fittings. Kit comes with passenger,...

Upgrade your 96-03 7.3L Powerstroke with this rebuilt Stage 1 High Pressure Oil Pump from CNC Fabrication, LLC. Typically these pumps will produce 5.1-5.6gpm which is usually enough volume to sustain 230/100 hybrid injectors. We do not list this pump as an aftermarket high...

Replace your 98.5-03 7.3L Powerstroke high-mileage OEM High Pressure Oil Pump lines with the #1 selling CNC Fabrication™ upgraded HPOP lines! These passenger and driver side lines are to replace the typical high mileage expensive leaky OEM HPOP lines that have the STC fittings....

Upgrade your 96-03 7.3L Powerstroke with this rebuilt Stage 2 High Pressure Oil Pump from CNC Fabrication, LLC. Typically this pump will flow 30% more than a brand new Bosch 99.5-03 pump, which is plenty enough volume to sustain 250/100 hybrid injectors. 250/200's can...

Upgrade your 03-04 6.0L Ford Powerstroke with this Stage 1 High Pressure Oil Pump from CNC Fabrication, LLC. MODEL/YEAR(S): 2003-2004 ENGINE SIZE: 6.0L Outfitted with a new upgraded housing that cures the infamous "back plate wear-out" with the original design.  Typically, these pumps will support...

Replace your 94.5-97 7.3L Powerstroke high-mileage OEM High Pressure Oil Pump lines with the #1 selling CNC Fabrication™ upgraded HPOP lines! These lines are to replace the typical high mileage expensive leaky OEM HPOP lines. Advanced HPOP lines with DuPont Teflon™ lining. Burst pressure...

Upgrade your fuel-system with The Original 4-line-feed fuel-line kit from CNC Fabrication designed to eliminate the infamous #8 injector knock and fuel starvation in the #1 and #8 cylinders during higher RPMs and heavy throttle while towing. TRUCK YEARS: 1999-03 ENGINE TYPE: 7.3L Upgraded...

Upgrade your 99.5-03 7.3L Powerstroke fuel system with our 4-line feed fuel line kit from CNC Fabrication that is designed to eliminate many of the infamous leaks with the stock fuel bowl. Not available for sale in the state of California TRUCK YEARS: 1999-2003 ENGINE TYPE:...

94.5-03 7.3L Powerstroke HPOP line o-ring replacement kit.  Shipping: Item ships USPS when Free Shipping is selected. If UPS is required please select UPS at checkout for the other shipping options. Here's the solution you were looking for to re-seal your CNC Fabrication 7.3L...

This line is for the early '99 through '03, but will work on the 94.5-97 trucks, but you will need to purchase the CNC Fabrication™ OBS hpop lines due to how the lines are routed on the OBS trucks.  Fittings are the same style...

Upgrade your 94.5-98.5 (OBS and Early 99) 7.3L Powerstroke fuel system with our 4-line feed fuel line kit from CNC Fabrication that is designed to eliminate many of the infamous leaks with the stock fuel bowl. Not available for sale in the state of...

Replace your driver and passenger side 94.5-97 OBS 7.3L Powerstroke high-mileage OEM High Pressure Oil Pump lines with a CNC Fabrication™ upgrade! Advanced HPOP lines with DuPont Teflon™ lining New Genuine Brennan™ Hydraulic fittings Burst pressure rating of 16,000psi and working temperature rating of...

Upgrade your 94.5-95 7.3L Powerstroke with this rebuilt Stage 2 High Pressure Oil Pump from CNC Fabrication, LLC. Typically, these pumps will produce 5.1-5.6gpm which is usually enough volume to sustain 230/100 hybrid injectors. We do not list this pump as an aftermarket high...

Upgrade your 94.5-03 7.3L Ford Powerstroke fuel system with one of our CNC Fabrication 4 Line Feed kits along with a fuel pump/filter assembly of your choosing, and a selection of add-on components. Don't forget to add your t-shirt size to the order notes!...

CNC Fabrication Upgraded Inter-cooler hose and clamp kit for late 1999 through 2003 7.3L Powerstroke. Features: 5 layer aramid reinforced silicone for high temp rating Rated to 180psi Stainless Steel American made T-bolts clamps Reinforcement rings just like factory Direct replacement of factory boots...

Installing these 99.5-03 7.3L Ford Powerstroke CNC Fabrication bushings will help keep you from crushing/distorting the factory stamped sheet metal intake plenums when tightening down your CAC boots.   Includes 2 bushings, one for the passenger side and one for the driver side plenums. ...

98.5-03 7.3L CNC Fabrication, LLC 4R100 Transmission Cooler Line Kit This kit is to replace your factory 4R100 transmission cooler lines for those that have already installed 6.0L Powerstroke transmission cooler that has 1/2" ports.  NOTE: If you need transmission hose, we recommend the...

These CNC Fabrication, LLC remanufactured Tow Master Plus injectors will put new life back into your 94.5-03 7.3L Ford Powerstroke Commonly called a Stage 1.5, these "Tow Master Plus" 180/30 injectors will typically produce around 375-425hp with proper supporting modifications depending on the year...

Upgrade your 1994.5-2003 7.3L Ford Powerstroke with this heavy duty stamped steel SFI rated E4OD or 4R100 flexplate from CNC Fabrication, LLC.  Features: Thicker material than OEM Silver Zinc plated to resist corrosion Fully balanced SFI rated FLEXPLATE INSTALL INSTRUCTIONS

CNC Fabrication™ L99-03 7.3L Air Intake Heater Plug Shipping: ***Free shipping is USPS First Class when ordered alone.*** MODEL/YEAR(S): 1999-2003 ENGINE SIZE: 7.3L The air intake heater, which is found in ’99.5 and up 7.3 Powerstrokes, blocks close to 20% of the air path in...