The SES light for overboost will come on at about 25 lbs. causing the PCM to decrease fuel delivery attempting to control the boost.  This condition usually occurs in "chipped" vehicles. Our BRV+ (Boost Relief Valve Plus) will relieve any excess pressure to the map sensor while...

KC TURBO- 300482 This is a new rebuild kit for BorgWarner S300-SXE turbochargers. Kit is exactly as shown in product image. It comes with an upgraded 360 degree thrust bearing. This will work on the following turbos: S357 S360 S362 S363 S364 S366  S369...

This turbo is for the 2005.5-2007 6.0L Powerstroke Garrett part number- 743250-5025S Product Highlights Compressor Wheel Garrett’s compressor wheel testing dictates 1 million cycles prior to introduction. This testing prevents issues such as low cycle fatigue (hub burst/ wheel splitting in half). A wheel may...

2003-2007 6.0L Powerstroke KC Turbos Jetfire S3R Gen 2 Dual Ball Bearing Turbo PN: 300266 Are you ready for the for the fastest spooling, most powerful stage 3 turbo on the market?  We have spent years redeveloping and testing our new Gen 2 KC...

Product Highlights Compressor Wheel Garrett’s compressor wheel testing dictates 1 million cycles prior to introduction. This testing prevents issues such as low cycle fatigue (hub burst/ wheel splitting in half). A wheel may exceed life expectancy but is at risk for premature failure if...

This KC Jetfire turbo works great on stock injectors, but to fully take advantage of all the extra air flow we recommend a 175/30 or 190/30 injector. This is a great turbo for those looking to push the limits of their truck. This turbo is...

KC TURBO- 300483 Features & Details:  Upgraded 360 degree thrust bearing New thrust collar New oil slinger New piston rings New journal bearings & sleeve New compressor cover o-ring & backing plate o-ring Description: This is a new rebuild kit for BorgWarner S400 SXE turbochargers. Kit...

Replace your prone to crack OEM piping with the KC Intercooler Pipe Kit. This kit increases air flow to help increase power and lower EGT's. Plus gives a custom look under your hood.  Features & Details: Available in Raw, Black, Red, Green, Blue, Gold,...

Edges EAS Pressure Sensor is a 0 - 100 PSIg 1/8-inch NPT sensor that plugs directly into the Universal Sensor Input system (p/n 98605). Edges Pressure Sensor comes equipped with the proper wires and connectors to plug right into the Universal Sensor Input system...

This turbo is for the 2004-2005 6.0L Powerstroke Garrett part number- 743250-5024S Product Highlights Compressor Wheel Garrett’s compressor wheel testing dictates 1 million cycles prior to introduction. This testing prevents issues such as low cycle fatigue (hub burst/ wheel splitting in half). A wheel may...

BorgWarner S400 SX-E S472FMW Features: Twin hydrodynamic journal bearings Extended Tip Technology Compressor Wheel Twin Scroll Turbine Housing Adjustable compressor and turbine housing orientation 360 degree Thrust Bearing Comp Wheel OD (mm): 96 Comp Wheel Inducer (mm): 72 Turbine Wheel OD (mm): 87 Oil feed...

BorgWarner S363SX-E Key Turbo Features: 360 degree Thrust Bearing Integrated Speed Sensor Port Forged Mill Compressor Wheel Pre-Machined Boost Port Optimized Compressor Stage Aerodynamics Comp Wheel OD (in): 3.44 Comp Wheel Inducer (in): 2.6 Comp Wheel Inducer (mm): 62.99 Turbine Wheel OD (mm): 79.76 Turbine Wheel Exducer (in): 2.89...

BorgWarner S364.5SX-E Key Turbo Features: 360 degree Thrust Bearing Integrated Speed Sensor Port Forged Mill Compressor Wheel Pre-Machined Boost Port Optimized Compressor Stage Aerodynamics Comp Wheel OD (in): 3.44 Comp Wheel Inducer (in): 2.54 Comp Wheel Inducer (mm): 64.47 Turbine Wheel OD (mm): 79.76 Turbine Wheel Exducer (in): 2.89...

BorgWarner S467.7FMW .90 A/R Turbine Housing: .90 A/R T-4 Inlet For 83mm Turbine, S467.7 Volute, Twin Flow 3.5” V-Band (4.21 marmon) Outlet ****This turbine housing is for use with the S467.7 turbo with an 83mm turbine.****  

BorgWarner S300 .91 A/R Turbine Housing: .91 A/R T-4 Inlet For 80mm Turbine, S362, s364.5, S366, S369 Volute, Twin Flow 3.5” V-Band (4.21 marmon) Outlet ****This turbine housing is for use with any s300 turbo supercore with an 80mm turbine.****  

Features & Details:  100% drop in turbo (no modifications required) Upgraded KC Billet compressor wheel Bump in power Stock Sized / Stock Replacement  Over 20 New Engineering Upgrades One year unlimited mileage warranty  Brand new! NO CORE required Comes with install kit Supports: Up to 155cc/Stock% injectors...

Features & Details: Stock Garrett 10 Blade Turbine Wheel 500 to 575+HP Billet 64x88 single plane compressor wheel with extended tips to 94mm Upgraded 360 degree thrust bearing 100% drop in ready (no modifications required) New VGT Solenoid  Brand new! NO CORE required  Comes with install kit...

Features & Details: Stock Garrett 10 Blade Turbine Wheel 425 to 525+HP Billet 61x88 single plane compressor wheel with extended tips to 93mm Upgraded 360 degree thrust bearing 100% drop in ready (no modifications required) New VGT Solenoid  Brand new! NO CORE required  Comes with install...

Features & Details: Stock Garrett 10 Blade Turbine Wheel 425 to 525+HP Billet 61x88 single plane compressor wheel with extended tips to 93mm Upgraded 360 degree thrust bearing 100% drop in ready (no modifications required) New VGT Solenoid  Brand new! NO CORE required  Comes with install...

Features & Details: Powder Coating can take up to 3 weeks before it ships Upgraded Gen 2 Dual Ball bearing Our redesigned Lighter and Stronger Jetfire 64x88mm single plane point milled billet wheel with extended tips to 94mm Upgraded .70ar race compressor cover with our signature drilled hole...