2003 6.0L Garrett Stock Replacement Turbo - 725390-5006S

Product Highlights Compressor Wheel Garrett’s compressor wheel testing dictates 1 million cycles prior to introduction. This testing prevents issues such as low cycle fatigue (hub...
Vendor: Garrett Turbos
SKU: 725390-5006S
Availability: Many In Stock
Product Type: Turbochargers
$875.95
$875.95
Please hurry! Only 0 left in stock
Subtotal: $875.95
10 customers are viewing this product

Return Policy

Within 21 Days

California Residents:
Prop 65 Warning:
Cancer and Reproductive Harm

Product Highlights

  • Compressor Wheel Garrett’s compressor wheel testing dictates 1 million cycles prior to introduction. This testing prevents issues such as low cycle fatigue (hub burst/ wheel splitting in half). A wheel may exceed life expectancy but is at risk for premature failure if reused.  Analysis of failed rebuilt units show micro cracks in compressor wheel bores.
  • Solenoid Control Valve The Solenoid Control Valve utilizes stricter control parameters to regulate oil flow through the unit. These controls minimize the amount of oil direct to the turbine end seal to reduce turbine seal leakage.
  • Turbine Wheel The multiple cycles of the 6.0L application can cause high cycle fatigue of the turbine blades. When a 6.0L turbocharger is reworked it is unknown how many cycles are on the turbocharger which can lead to premature failure. Extended cycles can cause tip failures which can be mistaken for foreign object damage.
  • Center Housing All new Garrett 6.0L Replacement turbos contain the up-dated center housing with a machined recess. The machined recess helps vent the moisture that could settle under the unison ring and minimize the corrosion in the contact area between the ring and housing.  The machined recess allows toxic liquids to bypass the delicate variable geometry mechanism to reduce buildup and interface friction. Brand new units feature these upgrades for extended turbocharger life on 100% of all units.
  • Unison Ring A brand new unison ring used with new vanes insures proper clearance thereby assuring superior turbo and engine performance. Eliminate problems associated with salvaged unison rings that increase side clearance with vanes that cause sluggish throttle response.
  • VNT Mechanism The leading cause for replacement is corrosion within the VNT Mechanism. Operating conditions of the 6.0L engine cause the turbo VNT mechanism to wear significantly in a normal lifecycle. Rebuilt units that salvage the mechanism can shorten turbo life. All new parts solve these problems.
  • Variable Geometry Vanes Typical high mileage vanes show extensive vane tab wear. Reuse of vanes can result in VNT mechanism malfunction. Garrett's all new aftermarket 6.0L turbocharger contains a new vane design with improved metallurgy for better performance and life. Remanufactured units may have slow vane response which can have performance and or emission implications.

Covered by (2 year) unlimited mileage warranty. Warranty covers any damages done during shipping, prior to installation, and if all installation steps were followed. Warranty VOID if damage done due to improper care of the purchaser's vehicle. Warranty's are non-transferable and only offered to the original purchaser. 

 

 

Brand: Garrett TurbosManufacturer Part Number: 725390-5006SLength (in): 14Width (in): 14Height (in): 14Weight (lbs): 40

Returns Policy

Return shipping is the sole responsibility of the customer.

CNC Fabrication, LLC™ will accept items to be returned or exchanged, that are in new, unopened, unworn, unaltered, and free of damages by the customer. Items returned  will incur a minimum 10% restocking fee (depending on item).  We will allow a full refund for "store credit" if a customer does not want to incur the minimum 10% restock fee.

Items MUST be returned with a copy of the original receipt and in the original packaging it was received in by the customer, if not, this may significantly delay the time to process the refund.

Restocking fee may be more if customer has caused any type of damage to the product, packaging, or missing parts that prohibits the product to be re-sold “as new” to the next potential customer. If the product is returned via a shipper, it is the responsibility of the original purchaser to be sure the product is secure in the return package to avoid any potential damage. If damage occurs, the original purchaser may not receive any refund whatsoever.

**No returns or refunds will be accepted on electrical items or special order items**

Items that are “intangible” (I.E. tuning for performance chips or programmers) are not refundable due to the nature of the product. If you would like to start a return, please request an RMA.

Shipping

All orders processed during regular business hours (Monday - Friday) 8am - 5pm (EST). Processed orders are usually shipped within the same business day provided order details are complete, within the shipping hours (8am-3pm), and there are no issues with payment. In some cases order may not go out until the next day due to how many order come in through the day. CNC Fabrication, LLC also reserves the right to override/change the customer's choice of shipping carrier in lieu to try and get the order to the customer as soon as possible. PLEASE be sure you enter the complete and correct shipping address or your package may be delayed or potentially delivered to the wrong address. CNC Fabrication, LLC is not liable for any order/package that is delivered to an incorrect customer provided address.

FREE SHIPPING: available on select items to the Continental US (lower 48 states)could be USPS or UPS depending on shipping cost and speed; does not include overnight or express service.

PRIORITY EXPRESS SHIPPING: does not guarantee overnight. It is 1-2 day, but usually 1 day.

CUSTOM SHIPPING: If you require custom shipping solution or have any questions, please Contact Customer Service.

SHIPPING DELAYS: We will do our best to get products out the door in a timely manner, once the items are picked up by the carrier we have no control over any delays they may encounter such as weather, routing issues, equipment breakdown etc.

DAMAGED ITEMS: Items damaged in shipping must be reported to CNC Fabrication, LLC within 7 days of the delivery so we can file the necessary paperwork with the carrier. Please keep all packaging and take pictures of the damage to email us in the process for ours and the carrier's records. Please DO NOT contact the carrier directly for damage; This will significantly delay the time to process the damage claim with the carrier.

Related Products

Recently Viewed Products