CNC Fabrication Stage 1 High Pressure Oil Pump (HPOP) – 1996–2003 7.3L Powerstroke -424017 Restore and upgrade your 96–03 7.3L Powerstroke with a flow-bench-tested Stage 1 High Pressure Oil Pump (HPOP) from CNC Fabrication. This rebuilt unit exceeds OEM specifications and is engineered to reliably...

Replace your 98.5-03 7.3L Powerstroke high-mileage OEM High Pressure Oil Pump lines with the #1 selling CNC Fabrication™ upgraded HPOP lines! These lines are to replace the typical high mileage expensive leaky OEM HPOP lines that have the STC fittings. Kit comes with passenger,...

Replace your 98.5-03 7.3L Powerstroke high-mileage OEM High Pressure Oil Pump lines with the #1 selling CNC Fabrication™ upgraded HPOP lines! These passenger and driver side lines are to replace the typical high mileage expensive leaky OEM HPOP lines that have the STC fittings....

Upgrade your 96-03 7.3L Powerstroke with this rebuilt Stage 2 High Pressure Oil Pump from CNC Fabrication, LLC. Typically this pump will flow 30% more than a brand new Bosch 99.5-03 pump, which is plenty enough volume to sustain 250/100 hybrid injectors. 250/200's can...

Upgrade your 99.5-03 7.3L Powerstroke fuel system with our 4-line feed fuel line kit from CNC Fabrication that is designed to eliminate many of the infamous leaks with the stock fuel bowl. Not available for sale in the state of California TRUCK YEARS: 1999-2003 ENGINE TYPE:...

Upgrade your 94.5-98.5 (OBS and Early 99) 7.3L Powerstroke fuel system with our 4-line feed fuel line kit from CNC Fabrication that is designed to eliminate many of the infamous leaks with the stock fuel bowl. Not available for sale in the state of...

Upgrade the starter in your 94.5-03 7.3L Ford Powerstroke with this genuine Denso High Torque Output starter from CNC Fabrication. This starter features a 4kw (5.36 horsepower) motor to crank over your engine with ease. Below is a YouTube video of our customers with...

Upgrade your fuel-system with The Original 4-line-feed fuel-line kit from CNC Fabrication designed to eliminate the infamous #8 injector knock and fuel starvation in the #1 and #8 cylinders during higher RPMs and heavy throttle while towing. TRUCK YEARS: 1999-03 ENGINE TYPE: 7.3L Upgraded...

Engineered for the 7.3L FORD® Powerstroke and is the GOLD standard in Powerstroke performance tuning, PHP's Hydra Chip™ unleashes up to 140HP and is capable of storing 17 tuning files at once. The chip is reprogrammable without having to take/ship the chip to a...

Kit includes: 2 seals for the fuel lines going to the heads 1 seal for the fuel supply line 1 seal for the fuel return line 2 seals for the drain valve 1 seal for the fuel bowl heater plug 1 seal for the...

Product Description: 96-03 7.3L Alliant Power Injection Pressure Regulator (IPR) Valve. OEM Numbers: 1829856C91, 1836412C91, 1841086C91, 1841217C91   Make Model Years Engine Model Notes Notes Ford F-250 1995 to 2003 Ford 7.3L Power Stroke   F Series, Excursion, E Series Ford F-350 1995 to 2003 Ford 7.3L Power Stroke...

This is a great replacement plenum gasket for your 7.3L Powerstroke for superior sealing without the RTV mess. 8 bolt gasket also available HERE.     These will fit your 94.5-95 if someone has swapped the cylinder heads to the 96 and newer 10 bolt...

CNC Fabrication Upgraded Inter-cooler hose and clamp kit for late 1999 through 2003 7.3L Powerstroke. Features: 5 layer aramid reinforced silicone for high temp rating Rated to 180psi Stainless Steel American made T-bolts clamps Reinforcement rings just like factory Direct replacement of factory boots...

Upgrade your 94.5-03 7.3L Ford Powerstroke fuel system with one of our CNC Fabrication 4 Line Feed kits along with a fuel pump/filter assembly of your choosing, and a selection of add-on components. Don't forget to add your t-shirt size to the order notes!...

CNC FABRICATION™ 94.5-03 STAGE 1 VALVE SPRING KIT MODEL/YEAR(S): 1994.5-2003 ENGINE SIZE: 7.3L Great mild upgrade over stock valve springs for around for under a 500hp engine.  OD: 1.354" ID:  0.940" SEAT LOAD: 120LBS @1.850" OPEN LOAD: 345LBS @1.350" COIL BIND: 1.250" RATE: 428.6LBS/IN...

Installing these 99.5-03 7.3L Ford Powerstroke CNC Fabrication bushings will help keep you from crushing/distorting the factory stamped sheet metal intake plenums when tightening down your CAC boots.   Includes 2 bushings, one for the passenger side and one for the driver side plenums. ...

These CNC Fabrication, LLC remanufactured Tow Master Plus injectors will put new life back into your 94.5-03 7.3L Ford Powerstroke Commonly called a Stage 1.5, these "Tow Master Plus" 180/30 injectors will typically produce around 375-425hp with proper supporting modifications depending on the year...

98.5-03 7.3L CNC Fabrication, LLC 4R100 Transmission Cooler Line Kit This kit is to replace your factory 4R100 transmission cooler lines for those that have already installed 6.0L Powerstroke transmission cooler that has 1/2" ports.  NOTE: If you need transmission hose, we recommend the...

CNC Fabrication™ L99-03 7.3L Air Intake Heater Plug Shipping: ***Free shipping is USPS First Class when ordered alone.*** MODEL/YEAR(S): 1999-2003 ENGINE SIZE: 7.3L The air intake heater, which is found in ’99.5 and up 7.3 Powerstrokes, blocks close to 20% of the air path in...

CNC Fabrication™ 94.5-03 Stage 2 Beehive Valve Spring Kit MODEL/YEAR(S): 1994.5-2003 ENGINE SIZE: 7.3L Rev up your engine's performance with the CNC Fabrication™ 94.5-03 Stage 2 Beehive Valve Spring Kit! Tailored for high-performance 7.3L Ford Powerstroke engines over 500hp, this premium valve spring kit...