Return shipping is the sole responsibility of the customer.
CNC Fabrication, LLC™ will accept items to be returned or exchanged, that are in new, unopened, unworn, unaltered, and free of damages by the customer within 21 days of receipt per the tracking number. Items returned after 21 days of receipt will incur a minimum 10% restocking fee (depending on item). We will allow a full refund for "store credit" if a customer does not want to incur the minimum 10% restock fee, but CNC Fabrication, LLC still must be notified within the 21 day grace period.
Items MUST be returned with a copy of the original receipt and in the original packaging it was received in by the customer, if not, this may significantly delay the time to process the refund.
Restocking fee may be more if customer has caused any type of damage to the product, packaging, or missing parts that prohibits the product to be re-sold “as new” to the next potential customer. If the product is returned via a shipper, it is the responsibility of the original purchaser to be sure the product is secure in the return package to avoid any potential damage. If damage occurs, the original purchaser may not receive any refund whatsoever.
**No returns or refunds will be accepted on electrical items or special order items**
Items that are “intangible” (I.E. tuning for performance chips or programmers) are not refundable due to the nature of the product.
If you would like to start a return, please request an RMA.
The California Office of Environmental Health Hazard Assessment established this website to provide the public with information on chemicals, products and places often associated with Proposition 65 warnings. These warnings inform Californians about their exposures to chemicals that cause cancer, birth defects or other reproductive harm. Visiting this website regularly will help you learn about these chemicals and how you can reduce your exposure to them. We will be adding new information frequently. www.p65warnings.ca.gov
Engineered for the 7.3L FORD® Powerstroke and is the GOLD standard in Powerstroke performance tuning, PHP's Hydra Chip™ unleashes up to 140HP and is capable of storing 17 tuning files at once. The chip is reprogrammable without having to take/ship the chip to a tuner. Package includes: The Hydra Chip™, Digital Switch, Ribbon cable and 6ft cable w/right-angle mini-USB connector (for live tuning)
**If you would like us to pre-load the chip with tunes for your truck, we will need the truck's PCM code located on the PCM itself (see picture below). If not, just enter N/A in the PCM Strategy information box to be able to add the Hydra chip to your shopping cart**
FREE STOCK TUNES FOR ALL 94.5-03 7.3 POWERSTROKES
Your Hydra Chip comes with access to the Power Hungry Performance server with all stock injector files by downloading the Hydraflash App at no additional cost to download your tunes. Examples of the stock tunes that already come with the Hydra Chip are listed in the table at the bottom of this page. Note** the chip comes blank and you download the tunes yourself as stated above using the app.
NOTE: All tunes featured on this page are for a STOCK injector truck/van.
If you require tunes for larger-than-stock (modified after-market injectors), please refer to the "Modified Injector Titan Server Access" page. This feature allow access to all modified injectors up to 250/100 size.
HAVE ANY MODS ON THIS LIST? Order custom 7.3L PSD tunes HERE
Click here to see the HYDRA CHIP™ INSTALLATION video
Click here to see the LOAD TUNES ON YOUR HYDRA CHIP™ video
Having any issues with your install??? Please visit Hydra chip Frequently Asked Questions
STOCK INJECTOR LIMITATIONS:
1994 to 1997 and early '99 Powerstroke diesels are fitted with smaller injectors than late '99 Super Duty models, and depending on tolerances, may be limited to ~65-100hp increase. Because of restrictions in both injector volume and HPOP capacity, your Powerstroke may be able to utilize between 80-120hp, although there is no guarantee that your power gains will be achieved. Vehicles with modified injectors are not subject to these restrictions. 1994-1997 Powerstroke have fewer Hydra Chip calibration selections due to power limits of their factory stock injectors; manual transmissions have fewer Hydra Chip tune options because of programming changes made for shifting between towing and horse power calibrations. All 7.3L PSD's have a minimum of 15 calibrations available.
HYDRA CHIP™ 'STOCK' TUNE REFERENCE CHART
Stock or Modified Stock | Useful for emissions or diagnostic purposes |
---|---|
25hp Extremely Heavy Tow | 12,500+ pounds |
40hp Heavy Tow | 10,000 -12,500 pounds |
65hp Moderate Tow | 7,500 - 10,000 pounds |
80hp Light Tow | Up to 7,500 pounds |
65hp Daily Driver | Good for all-around daily driving and economy |
80hp Daily Driver | |
65hp Performance | A little more aggressive than a Daily Driver while still maintaining manageable smoke output |
80hp Performance | |
100hp Performance* | |
100hp Race* | Play time! Offers a more aggressive fuel curve for improved low RPM response and top end power |
120hp Race* | |
140hp Extreme* | This is as big as it gets! (On stock injectors, anyway) |
High Idle - 1,000rpm | Ideal for PTO operation or for faster warm-ups. We do not recommend exceeding 1,200rpm for safety reasons. |
High Idle - 1,100rpm | |
High Idle - 1,200rpm | |
Whisper Mode™ | Hit the drive-thru and place your order or do your banking without having to shut off your truck |
Valet Mode 25 mph | Lowers the speed limiter |
Valet Mode 35 mph | |
Valet Mode 45 mph | |
Teen Driver™ 65mph | Locks the speed limiter at 65mph |
Teen Driver™ 75mph | Locks the speed limiter at 75 mph |
Return shipping is the sole responsibility of the customer.
CNC Fabrication, LLC™ will accept items to be returned or exchanged, that are in new, unopened, unworn, unaltered, and free of damages by the customer. Items returned will incur a minimum 10% restocking fee (depending on item). We will allow a full refund for "store credit" if a customer does not want to incur the minimum 10% restock fee.
Items MUST be returned with a copy of the original receipt and in the original packaging it was received in by the customer, if not, this may significantly delay the time to process the refund.
Restocking fee may be more if customer has caused any type of damage to the product, packaging, or missing parts that prohibits the product to be re-sold “as new” to the next potential customer. If the product is returned via a shipper, it is the responsibility of the original purchaser to be sure the product is secure in the return package to avoid any potential damage. If damage occurs, the original purchaser may not receive any refund whatsoever.
**No returns or refunds will be accepted on electrical items or special order items**
Items that are “intangible” (I.E. tuning for performance chips or programmers) are not refundable due to the nature of the product. If you would like to start a return, please request an RMA.
All orders processed during regular business hours (Monday - Friday) 8am - 5pm (EST). Processed orders are usually shipped within the same business day provided order details are complete, within the shipping hours (8am-3pm), and there are no issues with payment. In some cases order may not go out until the next day due to how many order come in through the day. CNC Fabrication, LLC also reserves the right to override/change the customer's choice of shipping carrier in lieu to try and get the order to the customer as soon as possible. PLEASE be sure you enter the complete and correct shipping address or your package may be delayed or potentially delivered to the wrong address. CNC Fabrication, LLC is not liable for any order/package that is delivered to an incorrect customer provided address.
FREE SHIPPING: available on select items to the Continental US (lower 48 states)could be USPS or UPS depending on shipping cost and speed; does not include overnight or express service.
PRIORITY EXPRESS SHIPPING: does not guarantee overnight. It is 1-2 day, but usually 1 day.
CUSTOM SHIPPING: If you require custom shipping solution or have any questions, please Contact Customer Service.
SHIPPING DELAYS: We will do our best to get products out the door in a timely manner, once the items are picked up by the carrier we have no control over any delays they may encounter such as weather, routing issues, equipment breakdown etc.
DAMAGED ITEMS: Items damaged in shipping must be reported to CNC Fabrication, LLC within 7 days of the delivery so we can file the necessary paperwork with the carrier. Please keep all packaging and take pictures of the damage to email us in the process for ours and the carrier's records. Please DO NOT contact the carrier directly for damage; This will significantly delay the time to process the damage claim with the carrier.
Receive our latest updates about our products and promotions.
Thanks for subscribing!
This email has been registered!