1999-2003 7.3L-Featured Products

Replace your 98.5-03 7.3L Powerstroke high-mileage OEM High Pressure Oil Pump lines with the #1 selling CNC Fabrication™ upgraded HPOP lines! These lines are to replace the typical high mileage expensive leaky OEM HPOP lines that have the STC fittings. Kit comes with passenger,...

Upgrade your 96-03 7.3L Powerstroke with this rebuilt Stage 2 High Pressure Oil Pump from CNC Fabrication, LLC. Typically this pump will flow 30% more than a brand new Bosch 99.5-03 pump, which is plenty enough volume to sustain 250/100 hybrid injectors. 250/200's can...

Upgrade your fuel-system with The Original 4-line-feed fuel-line kit from CNC Fabrication designed to eliminate the infamous #8 injector knock and fuel starvation in the #1 and #8 cylinders during higher RPMs and heavy throttle while towing. TRUCK YEARS: 1999-03 ENGINE TYPE: 7.3L Upgraded...

Upgrade your 99.5-03 7.3L Powerstroke fuel system with our 4-line feed fuel line kit from CNC Fabrication that is designed to eliminate many of the infamous leaks with the stock fuel bowl. Not available for sale in the state of California TRUCK YEARS: 1999-2003 ENGINE TYPE:...

98.5-03 7.3L CNC Fabrication, LLC 4R100 Transmission Cooler Line Kit This kit is to replace your factory 4R100 transmission cooler lines for those that have already installed 6.0L Powerstroke transmission cooler that has 1/2" ports.  NOTE: If you need transmission hose, we recommend the...

These CNC Fabrication, LLC remanufactured Tow Master Plus injectors will put new life back into your 94.5-03 7.3L Ford Powerstroke Commonly called a Stage 1.5, these "Tow Master Plus" 180/30 injectors will typically produce around 375-425hp with proper supporting modifications depending on the year...

Upgrade your 1994.5-2003 7.3L Ford Powerstroke with this heavy duty stamped steel SFI rated E4OD or 4R100 flexplate from CNC Fabrication, LLC.  Features: Thicker material than OEM Silver Zinc plated to resist corrosion Fully balanced SFI rated FLEXPLATE INSTALL INSTRUCTIONS

These billet intake plenums are a nice upgrade over the stock flimsy stamped sheet metal and will not deform the center inlet port when installing your CAC boot clamps. Features: High strength 6061-T6511 aircraft aluminum Bolt/nut kit included Tube of Permatex Ultra Gray RTV...

Upgrade your 1994.5-2003 7.3L Ford Powerstroke with this extreme duty billet steel SFI rated E4OD or 4R100 flexplate from CNC Fabrication, LLC.  Features: Thicker material than our stamped SFI flexplate Black Oxide finish to resist corrosion Fully balanced SFI rated FLEXPLATE INSTALL INSTRUCTIONS

98.5-03 7.3L CNC Fabrication, LLC 4R100 Transmission Cooler Line Kit This kit is to replace your factory 4R100 transmission cooler lines with 3/8" hose barbs to match the factory transmission cooler ports.  NOTE: If you need transmission hose, we recommend the Gates 27059 as...