These CNC Fabrication, LLC remanufactured Stock Plus (160/0) injectors will put new life back into your 94.5-03 7.3L Ford Powerstroke.
Commonly called a Stage 1 or AC code High Output injectors, these "Stock Plus" 160/0 injectors will typically produce around 325-375hp with proper supporting modifications depending on the year of your truck.
**See Suggested Modifications tab for turbo, fuel, and hpop upgrades**
Features:
- Great for towing, or just wanting a mild power increase
- Stock Nozzles
- Tungsten Coated Plungers and Barrels
- O-rings
- Nozzle and Intensifiers Springs
-
Better than OE specifications
- We do NOT use shims, these injectors are machined to set proper armature clearance
- Each set of injectors will come with flow sheet test results
- Tested on the newest Hartridge flow bench using the latest injector technology
Shipping: LEAD TIMES VARY DEPENDING ON WORKLOAD
**PLEASE ALLOW 3-5 DAYS AFTER YOUR CORE(S) HAS BEEN RECEIVED FOR OUR ACCOUNTING TEAM TO PROCESS YOUR REFUND. EXPECT DELAYS IF YOU DO NOT FILL OUT THE PAPERWORK PROPERLY**
**See Core Policy >>> Here <<<**
If you are sending in your cores first, please click the "SENDING IN FIRST" link below and print off the form to send it in with your injectors. If you have extra cores, please see the other form for store credit or reimbursement options.
Warranty:
Covered by CNC Fabrication's limited lifetime warranty. Warranty covers any damages done during shipping, prior to installation, and if all installation steps were followed. Warranty VOID if damage is done due to improper care of the purchaser's vehicle, improper fuel, etc. Warranties are non-transferable, and only offered to the original purchaser.
Suggested Modifications
94.5-97 Trucks: These are a great upgrade from the stock 90cc injector with no other supporting mods. We do recommend upgrading your turbo at the very least with a billet wheel. These will run just like stock on OBS trucks with no custom tuning needed, and will work with canned tunes due to them already being a single shot injector, but custom tuning will be better.
Recommended Turbo Options:
- KC Turbos 94.5-03 7.3L S300 Turbine/Billet Wheel Kit - 300377
- 94.5-97 KC Turbo Stock Plus - 300134
- KC Turbo KC300X Stage 1 63/70 94-97 7.3L Turbo 1.0 AR Housing - 300163
- Borg Warner s363sxe
Recommended Fuel Upgrade: None needed
Recommended Hpop Upgrade:
- Bosch 99.5-03 7.3L High Pressure Oil Pump - HP008X (Cannot be used on 94.5-95 model years)
- CNC Fabrication 94.5-95 7.3L Stage 1 HPOP - 424015
- CNC Fabrication 96-03 7.3L Stage 1 HPOP - 424017
98.5-03 Trucks: These are a mild power upgrade and a bit more efficient than stock 130-140cc split-shot injectors. They will work with little to no other modifications except they will require custom tuning due to these being a single shot injector vs split shot. No turbo upgrade is necessary, but we do recommend a billet wheel or this turbo. for the 99.5-03 or this one if you have the early 99 truck.
Recommended Turbo Options:
- KC Turbos 94.5-03 7.3L S300 Turbine/Billet Wheel Kit - 300377
- KC Turbo 99.5-03 7.3L Stock Plus Turbo - 300132
- KC Turbo KC300X 63/68 Late 99-03 7.3L Turbo - 300235
- KC Turbo EARLY 99 7.3L Stock Plus Turbo - 300133
- KC Turbo KC300X 63/68 Early 99 7.3L Turbo - 300234
- Borg Warner s363sxe
Recommended Fuel Upgrade:
- None needed, but this kit is a nice upgrade below
- CNC Fabrication 99-03 7.3L 4-Line Feed Fuel Line Kit - 422001
Recommended Hpop Upgrade:
- Bosch 99.5-03 7.3L High Pressure Oil Pump - HP008X
- CNC Fabrication 96-03 7.3L Stage 1 HPOP - 424017
Brand: CNC FabricationManufacturer Part Number: 422036Length (in): 17Width (in): 11Height (in): 7Weight (lbs): 25
Returns Policy
Return shipping is the sole responsibility of the customer.
CNC Fabrication, LLC™ will accept items to be returned or exchanged, that are in new, unopened, unworn, unaltered, and free of damages by the customer. Items returned will incur a minimum 10% restocking fee (depending on item). We will allow a full refund for "store credit" if a customer does not want to incur the minimum 10% restock fee.
Items MUST be returned with a copy of the original receipt and in the original packaging it was received in by the customer, if not, this may significantly delay the time to process the refund.
Restocking fee may be more if customer has caused any type of damage to the product, packaging, or missing parts that prohibits the product to be re-sold “as new” to the next potential customer. If the product is returned via a shipper, it is the responsibility of the original purchaser to be sure the product is secure in the return package to avoid any potential damage. If damage occurs, the original purchaser may not receive any refund whatsoever.
**No returns or refunds will be accepted on electrical items or special order items**
Items that are “intangible” (I.E. tuning for performance chips or programmers) are not refundable due to the nature of the product. If you would like to start a return, please request an RMA.
Shipping
All orders processed during regular business hours (Monday - Friday) 8am - 5pm (EST). Processed orders are usually shipped within the same business day provided order details are complete, within the shipping hours (8am-3pm), and there are no issues with payment. In some cases order may not go out until the next day due to how many order come in through the day. CNC Fabrication, LLC also reserves the right to override/change the customer's choice of shipping carrier in lieu to try and get the order to the customer as soon as possible. PLEASE be sure you enter the complete and correct shipping address or your package may be delayed or potentially delivered to the wrong address. CNC Fabrication, LLC is not liable for any order/package that is delivered to an incorrect customer provided address.
FREE SHIPPING: available on select items to the Continental US (lower 48 states)could be USPS or UPS depending on shipping cost and speed; does not include overnight or express service.
PRIORITY EXPRESS SHIPPING: does not guarantee overnight. It is 1-2 day, but usually 1 day.
CUSTOM SHIPPING: If you require custom shipping solution or have any questions, please Contact Customer Service.
SHIPPING DELAYS: We will do our best to get products out the door in a timely manner, once the items are picked up by the carrier we have no control over any delays they may encounter such as weather, routing issues, equipment breakdown etc.
DAMAGED ITEMS: Items damaged in shipping must be reported to CNC Fabrication, LLC within 7 days of the delivery so we can file the necessary paperwork with the carrier. Please keep all packaging and take pictures of the damage to email us in the process for ours and the carrier's records. Please DO NOT contact the carrier directly for damage; This will significantly delay the time to process the damage claim with the carrier.
- Choosing a selection results in a full page refresh.