These Precision of NH converters are a perfect fit for the lower budget build and handle medium to slightly high horsepower for the owner that wants a great performing truck to tow, daily drive, and even having fun on the street.  Precision of New...

7.3L Custom Calibrations - Modified Injectors For optimal performance and drivability, these tunes utilize the MAP sensor, therefore a boost fooler is highly recommended. Brian Jelich has been tuning the 7.3 Powerstroke since 2010 and perfecting the art of custom tuning to match each...

Here's the solution you were looking for to re-seal your 7.3L HPOP and line fittings. This will re-seal all 6 fittings on our 3 line HPOP Line kits along with the rear construction port and passenger side construction port on the pump. This kit...

Upgrade your 94.5-03 7.3L Ford Powerstroke with this direct replacement 04-07 6.0L transmission cooler from CNC Fabrication. This is a great upgrade for 94.5-03 7.3L trucks and vans. **NOTE:  If you are purchasing this cooler for a 94.5-97 model year, please choose the 1/2...

These CNC Fabrication, LLC remanufactured Mild Street (238/80, 238/100, or 238/200) hybrid injectors will put new life back into your 94.5-03 7.3L Ford Powerstroke. Commonly called a Stage 3, these "Hot Street" 238cc hybrid injectors will typically produce around 500-550hp with proper supporting modifications...

This filter fits E40D and 4R100 transmissions with the deeper pan (F81Z7A194BA).   

98.5-03 7.3L CNC Fab 4R100 Transmission Cooler Adapter Hose Kit This kit is to adapt your factory 4R100 transmission cooler lines to a 6.0L Ford Powerstroke transmission cooler that has the 1/2 inch ports. INCLUDED IN THIS KIT: 6' x 1/2" Transmission Cooler hose...

This manifold block is for those who have already installed the Ford JOB2 5R110W transmission pan and filter found in the 2008.5-2010 6.4L Powerstroke.  If you have not installed the later 6.4L Powerstroke transmission pan and filter, then please add the part number 6.0-TFBM-KIT...

Introducing a USB extension cable for your Power Hungry Performance Hydra chip. Your go-to solution for seamless connectivity! Designed with convenience in mind, this cable features a handy 90-degree angled mini-USB plug. Simply plug it into your chip, slide it back onto the J3...

Our Sleeve Tools are 100% Made in the USA! Machined right here in Northeast Ohio! The 7.3L Power Stroke injectors sit in a brass sleeve that separates the injector, and fuel, from the engine's coolant. These brass sleeves weaken and fatigue from age and...

Revitalize your 1997-2003 Ford 7.3L Powerstroke with the reliable genuine Ford OEM Oil Pan from CNC Fabrication and Diesel performance. Designed as a direct replacement for your rusted, leaking, or damaged oil pan, this genuine Ford oil pan ensures seamless compatibility and top-notch performance....

94.5-97 7.3L CNC Fabrication E4OD Transmission Cooler Adapter Hose Kit This kit is to adapt your factory E4OD transmission cooler lines to a 6.0L Ford Powerstroke transmission cooler that has the 1/2 inch ports. INCLUDED IN THIS KIT: 6' x 1/2" Transmission Cooler hose...

7.3L Ford Power Stroke Stage 1 Billet Cam   This camshaft was designed and built by diesel enthusiast engineers. Street use Drop in, no piston fly-cuts required Valve spring upgrade recommended for competition use RCD chromoly push rods recommended Optimized valve timing Increased lift...

98.5-03 7.3L CNC Fabrication, LLC ZF6 Transmission Cooler Line Kit This kit is to replace your factory ZF6 transmission cooler lines with 3/8" hose barbs to match the factory transmission cooler ports.  NOTE: Please be mindful that these lines are one piece and rather...

Introducing the ultimate fuel upgrade for your 03-07 6.0L engine that is equipped with a Stock intake plenum. The CNC Fabrication 4-Line feed stainless steel fuel line kit! Designed with precision and durability in mind, this kit will take your fuel system to the...

Ford 1999.5 - 2003 7.3L replacement 409 Stainless Steel bellowed up-pipes and gaskets. New! This Dieselsite (now in 409 Stainless Steel) up-pipe kit was designed to replace the poorly designed OEM standard equipment up-pipes and donut gaskets that typically leak. This design allows for expansion and...

Genuine Ford/Motorcraft engine oil cooler gaskets and o-rings.  Kit includes: 2 large O-rings (1C3Z6C610BA) 2 small O-rings (1C3Z6K649BA) Front cooler adapter to engine block gasket (F7TZ6A636AAA) Rear cooler adapter to engine block gasket (F4TZ6A636A)

S&B Filters KF-1059D 99-03 7.3L Ford Powerstroke Cold Air Intake Replacement Dry Filter (disposable).

FASS TSF14180F140G Titanium Signature Series Diesel Fuel Lift Pump 140GPH@ 60-65PSI Ford Powerstroke 7.3L and 6.0L 1999-2007 Part No: TSF14180F140G CARB# D-713-4 The Titanium Signature Series diesel fuel system Featuring our Revolutionary Whisper Technology was engineered by FASS Diesel Fuel Systems to be the...

Turn your engine bay into a masterpiece with this CNC Fabrication billet engine oil fill cap, designed exclusively for the 7.3L, 6.0L, & 6.4L Ford Powerstroke engine. This isn’t just another accessory; it’s a statement piece crafted from premium aircraft-quality billet 6061 aluminum, ensuring...