**DIY Products Are NOT Covered Under Warranty** DIY KITS are meant for those who want to build their own turbo. It is not meant to be just a cheaper option.  If you don't feel confident in putting together your own turbo then THIS IS...

This is a MUST HAVE for your Powermax. The stock Powermax comes with a horrible cast compressor wheel that causes slow spool up, high egt's, and low power. This drop in 63.5mm Single plane GTX style billet wheel solves all those problem and will make it...

Makes a nice upgrade for the DIY builder who wants a little more flow and likes the sound of the 2003 whistle turbo. We offer both the 64mm (05-07 300249) & 66mm (04 300014) turbines. All KC Turbo brand products have a 1 year...

THIS WHEEL IS FOR THE HOLSET H2EImportant tips: Holset turbos use two different style nuts holding the wheel on. If it is a 6 point nut, then tighten to 133 in/lbs.If it is a 12 point nut, then tighten to 124 in/lbs.It is a left...

Covered by KC Turbos' (1 year) replacement warranty. Warranty covers any damages done during shipping, prior to installation, and if all installation steps were followed. Warranty VOID if damage done due to improper care of the purchaser's vehicle. Warranties are non-transferable and only offered...

Covered by KC Turbos' (1 year) replacement warranty. Warranty covers any damages done during shipping, prior to installation, and if all installation steps were followed. Warranty VOID if damage done due to improper care of the purchaser's vehicle. Warranties are non-transferable and only offered...

KC Upgraded 38r Turbo Rebuild Kit Features & Details: Drop in ready Upgraded 300x turbine wheel Upgraded KC billet compressor wheel Easily rebuildable Journal bearing design Quicker spool up More boost Increased HP and TQ Description: This replacement center section is designed to drop...

BorgWarner S300 .88 A/R Turbine Housing: .88 A/R T-4 Inlet For 80mm Turbine, S362, s364.5, S366, S369 Open Flow Volute 3.5” V-Band (4.21 marmon) Outlet ****This turbine housing is for use with any s300 turbo supercore with an 80mm turbine.****  

BorgWarner S300 .91 A/R Turbine Housing: .91 A/R T-4 Inlet For 80mm Turbine, S362, s364.5, S366, S369 Volute, Twin Flow 3.5” V-Band (4.21 marmon) Outlet ****This turbine housing is for use with any s300 turbo supercore with an 80mm turbine.****  

BorgWarner S300 1.0 A/R Turbine Housing: 1.0 A/R T-4 Inlet For 80mm Turbine, S362, s364.5, S366, S369 Volute, Twin Flow 3.5” V-Band (4.21 marmon) Outlet ****This turbine housing is for use with any s300 turbo supercore with an 80mm turbine.****  

BorgWarner S467.7FMW 1.00 A/R Turbine Housing: 1.00 A/R T-4 Inlet For 83mm Turbine, S467.7 Volute, Twin Scroll 3.5” V-Band (4.21 marmon) Outlet ****This turbine housing is for use with the S467.7 turbo with an 83mm turbine.****  

BorgWarner S467.7FMW 1.10 A/R Turbine Housing: 1.10 A/R T-4 Inlet For 83mm Turbine, S467.7 Volute, Twin Scroll 3.5” V-Band (4.21 marmon) Outlet ****This turbine housing is for use with the S467.7 turbo with an 83mm turbine.****  

BorgWarner S467.7FMW 1.25 A/R Turbine Housing: 1.25 A/R T-4 Inlet For 83mm Turbine, S467.7 Volute, Twin Scroll 3.5” V-Band (4.21 marmon) Outlet ****This turbine housing is for use with the S467.7 turbo with an 83mm turbine.****  

BorgWarner S400 1.25 A/R Turbine Housing: 1.25 A/R T-4 Inlet For 87mm Turbine, S472, s475, s476, s480, s482 Volute, Twin Scroll 3.5” V-Band (4.21 marmon) Outlet ****This turbine housing is for use with the S472, s475, s476, s480, s482 turbos with an 87mm turbine.****  

BorgWarner S400 1.10 A/R Turbine Housing: 1.10 A/R T-4 Inlet For 87mm Turbine Volute, Twin Scroll 3.5” V-Band (4.21 marmon) Outlet ****This turbine housing is for use with the S472, s475, s476, s480, s482 turbo with an 87mm turbine.****  

BorgWarner S400 .90 A/R Turbine Housing: .90 A/R T-4 Inlet For 87mm Turbine Volute, Twin Scroll 3.5” V-Band (4.21 marmon) Outlet ****This turbine housing is for use with the S472, S475, S476, S480, S482 turbo with an 87mm turbine.****  

KC Turbine Housing Features & Details: Drop in ready Waste-gated  Reduced back pressure .84 A/R Description: This is an upgraded .84 A/R turbine housing with wastegate for the 99-03 7.3L Ford Powerstroke Super Duty. This will bolt right onto your stock turbo and will...

KC Turbine Housing Features & Details: High flow  Drop in ready Waste-gated  Reduced back pressure 1.0 A/R Description: This is an upgraded high flow 1.0 A/R turbine housing with wastegate for the 99-03 7.3L Ford Powerstroke Super Duty. This will bolt right onto your...

BorgWarner S300SX3 SX .83 A/R T4 68/76mm .83 A/R T-4 Inlet For 68mm Turbine Volute, Twin Scroll 3.5” V-Band (4.21 marmon) Outlet **This turbine housing is for use with the S300 turbo with an 68mm turbine.**  

BorgWarner S300SX3 SX .91 A/R T4 68/76mm .91 A/R T-4 Inlet For 68mm Turbine Volute, Twin Scroll 3.5” V-Band (4.21 marmon) Outlet **This turbine housing is for use with the S300 turbo with an 68mm turbine.**