GARRETT 99-03 7.3L HIGH FLOW NON-EBPV EXHAUST OUTLET - 451274-0005 THIS NON-EBPV TURBO OUTLET FLANGE FOR THE EARLY 99 THROUGH 2003 7.3L GTP38 OR GTP38R TURBOS IS FOR THOSE THAT WISH TO ELIMINATE THE EXHAUST BACK PRESSURE VALVE ALONG WITH ELIMINATING THE EPBV ACTUATOR...

*THIS IS A DROP IN WHEEL KIT, SO NO MODIFICATIONS ARE NEEDED. * Drop in ready Upgraded 360 bearing  Component Balanced Quicker spool up More air flow Rebuild kit included KC Billet compressor wheel balanced with our new s300 style Turbine wheel. The entire...

Our KC drop in 6x6 style billet compressor wheels with extended tips are a great upgrade for your 94.5-03 7.3L Ford Powerstroke that is looking for a little quicker spool, a little more air flow, and lower egts.  This wheel is not noisy like...

*THIS IS A DROP IN WHEEL, SO NO MODIFICATIONS ARE NEEDED. * This upgraded turbine wheel for your 94.5-03 7.3L Ford Powerstroke will captures more air, will spool much faster, and is more efficient. This new wheel is based off of an s300sxe style...

DIESELSITE WW2 - WICKED WHEEL2® FOR 7.3L POWERSTROKE 1994-2003 DS-WW38 THIS WHEEL IS A 1994 - 2003 FORD PSD 7.3L PSD PERFORMANCE BILLET COMPRESSOR WHEEL FOR STOCK GTP38 AND TP38 TURBO APPLICATIONS - FOR STOCK TURBO APPLICATIONS FROM 1994-2003 (FREE PEDESTAL O-RINGS INCLUDED) SPECIAL...

BorgWarner S467.7FMW .90 A/R Turbine Housing: .90 A/R T-4 Inlet For 83mm Turbine, S467.7 Volute, Twin Flow 3.5” V-Band (4.21 marmon) Outlet ****This turbine housing is for use with the S467.7 turbo with an 83mm turbine.****  

THIS WHEEL IS FOR THE HOLSET H2EImportant tips: Holset turbos use two different style nuts holding the wheel on. If it is a 6 point nut, then tighten to 133 in/lbs.If it is a 12 point nut, then tighten to 124 in/lbs.It is a left...

BorgWarner S400 1.10 A/R Turbine Housing: 1.10 A/R T-4 Inlet For 87mm Turbine Volute, Twin Scroll 3.5” V-Band (4.21 marmon) Outlet ****This turbine housing is for use with the S472, s475, s476, s480, s482 turbo with an 87mm turbine.****  

BorgWarner S400 1.25 A/R Turbine Housing: 1.25 A/R T-4 Inlet For 87mm Turbine, S472, s475, s476, s480, s482 Volute, Twin Scroll 3.5” V-Band (4.21 marmon) Outlet ****This turbine housing is for use with the S472, s475, s476, s480, s482 turbos with an 87mm turbine.****  

BorgWarner S400 1.00 A/R Turbine Housing: 1.00 A/R T-4 Inlet For 87mm Turbine Volute, Twin Scroll 3.5” V-Band (4.21 marmon) Outlet ****This turbine housing is for use with the S472, s475, s476, s480, s482 turbo with an 87mm turbine.****  

BorgWarner S400 .90 A/R Turbine Housing: .90 A/R T-4 Inlet For 87mm Turbine Volute, Twin Scroll 3.5” V-Band (4.21 marmon) Outlet ****This turbine housing is for use with the S472, S475, S476, S480, S482 turbo with an 87mm turbine.****  

BorgWarner S467.7FMW 1.25 A/R Turbine Housing: 1.25 A/R T-4 Inlet For 83mm Turbine, S467.7 Volute, Twin Scroll 3.5” V-Band (4.21 marmon) Outlet ****This turbine housing is for use with the S467.7 turbo with an 83mm turbine.****  

BorgWarner S467.7FMW 1.10 A/R Turbine Housing: 1.10 A/R T-4 Inlet For 83mm Turbine, S467.7 Volute, Twin Scroll 3.5” V-Band (4.21 marmon) Outlet ****This turbine housing is for use with the S467.7 turbo with an 83mm turbine.****  

BorgWarner S467.7FMW 1.00 A/R Turbine Housing: 1.00 A/R T-4 Inlet For 83mm Turbine, S467.7 Volute, Twin Scroll 3.5” V-Band (4.21 marmon) Outlet ****This turbine housing is for use with the S467.7 turbo with an 83mm turbine.****  

BorgWarner S300 1.0 A/R Turbine Housing: 1.0 A/R T-4 Inlet For 80mm Turbine, S362, s364.5, S366, S369 Volute, Twin Flow 3.5” V-Band (4.21 marmon) Outlet ****This turbine housing is for use with any s300 turbo supercore with an 80mm turbine.****  

BorgWarner S300 .91 A/R Turbine Housing: .91 A/R T-4 Inlet For 80mm Turbine, S362, s364.5, S366, S369 Volute, Twin Flow 3.5” V-Band (4.21 marmon) Outlet ****This turbine housing is for use with any s300 turbo supercore with an 80mm turbine.****  

BorgWarner S300 .88 A/R Turbine Housing: .88 A/R T-4 Inlet For 80mm Turbine, S362, s364.5, S366, S369 Open Flow Volute 3.5” V-Band (4.21 marmon) Outlet ****This turbine housing is for use with any s300 turbo supercore with an 80mm turbine.****  

KC Turbine Housing Features & Details: High flow  Drop in ready Waste-gated  Reduced back pressure 1.0 A/R Description: This is an upgraded high flow 1.0 A/R turbine housing with wastegate for the 99-03 7.3L Ford Powerstroke Super Duty. This will bolt right onto your...

KC Turbine Housing Features & Details: Drop in ready Waste-gated  Reduced back pressure .84 A/R Description: This is an upgraded .84 A/R turbine housing with wastegate for the 99-03 7.3L Ford Powerstroke Super Duty. This will bolt right onto your stock turbo and will...