All products

Upgrade your 94.5-95 7.3L Powerstroke with this rebuilt Stage 2 High Pressure Oil Pump from CNC Fabrication, LLC. Typically, these pumps will produce 5.1-5.6gpm which is usually enough volume to sustain 230/100 hybrid injectors. We do not list this pump as an aftermarket high...

CNC Fabrication Upgraded Inter-cooler hose and clamp kit for late 1999 through 2003 7.3L Powerstroke. Features: 5 layer aramid reinforced silicone for high temp rating Rated to 180psi Stainless Steel American made T-bolts clamps Reinforcement rings just like factory Direct replacement of factory boots...

This is a great replacement plenum gasket for your 7.3L Powerstroke for superior sealing without the RTV mess. 8 bolt gasket also available here.     Features: Handle higher boost No mess Compressed thickness of 0.060" Made of AFM material  

WESTERN/FISHER/TROMBETTA SNOWPLOW/GLOWPLUG RELAY  Features: VOLTAGE: 12V CONTINUOUS AMPS: 150A SURGE AMPS: 800A CONDITION: NEW MOUNTING: FLAT 180 (F180) DUTY CYCLE: CONTINUOUS 100% CASE MATERIAL: PLASTIC NUMBER OF TERMINALS: 4 *NOTE* These are plow relays and not a true direct replacement. Only one stud will be...

Installing these 99.5-03 7.3L Ford Powerstroke CNC Fabrication bushings will help keep you from crushing/distorting the factory stamped sheet metal intake plenums when tightening down your CAC boots.   Includes 2 bushings, one for the passenger side and one for the driver side plenums. ...

CNC Fabrication™ L99-03 7.3L Air Intake Heater Plug Shipping: ***Free shipping is USPS First Class when ordered alone.*** MODEL/YEAR(S): 1999-2003 ENGINE SIZE: 7.3L The air intake heater, which is found in ’99.5 and up 7.3 Powerstrokes, blocks close to 20% of the air path in...

98.5-03 7.3L CNC Fabrication, LLC 4R100 Transmission Cooler Line Kit This kit is to replace your factory 4R100 transmission cooler lines for those that have already installed 6.0L Powerstroke transmission cooler that has 1/2" ports.  NOTE: If you need transmission hose, we recommend the...

Product Description: Injector Control Pressure (ICP) Sensor ALWAYS USE OEM ELECTRICAL COMPONENTS ON YOUR POWERSTROKE. IT IS HIGHLY RECOMMENDED THAT YOU USE OEM QUALITY PARTS.  AFTERMARKET PARTS STORE BRANDS WILL TYPICALLY HAVE A HIGHER FAILURE RATE. **THIS PART SUPERSEDES PREVIOUS PART NUMBER- F6TZ9F838A** 

These CNC Fabrication, LLC remanufactured Tow Master Plus injectors will put new life back into your 94.5-03 7.3L Ford Powerstroke Commonly called a Stage 1.5, these "Tow Master Plus" 180/30 injectors will typically produce around 375-425hp with proper supporting modifications depending on the year...

Product Description: Injection Pressure Regulator (IPR) Valve. OEM Numbers: 1829856C91, 1836412C91, 1841086C91, 1841217C91   Make Model Years Engine Model Notes Notes Ford F-250 1995 to 2003 Ford 7.3L Power Stroke   F Series, Excursion, E Series Ford F-350 1995 to 2003 Ford 7.3L Power Stroke   F Series, Excursion,...

Upgrade your 1994.5-2003 7.3L Ford Powerstroke with this heavy duty stamped steel SFI rated E4OD or 4R100 flexplate from CNC Fabrication, LLC.  Features: Thicker material than OEM Silver Zinc plated to resist corrosion Fully balanced SFI rated FLEXPLATE INSTALL INSTRUCTIONS

CNC FABRICATION™ 94.5-03 STAGE 1 VALVE SPRING KIT MODEL/YEAR(S): 1994.5-2003 ENGINE SIZE: 7.3L Great mild upgrade over stock valve springs for around for under a 500hp engine.  OD: 1.354" ID:  0.940" SEAT LOAD: 119LBS @1.800" OPEN LOAD: 312LBS @1.350" COIL BIND: 1.280" RATE: 458LBS/IN...

ALWAYS USE OEM ELECTRICAL COMPONENTS ON YOUR POWERSTROKE. IT IS HIGHLY RECOMMENDED THAT YOU USE OEM QUALITY PARTS.  AFTERMARKET PARTS STORE BRANDS WILL TYPICALLY HAVE A HIGHER FAILURE RATE.

Product Description: Injector O-ring Kit OEM Numbers: 1825806C91, 4C3Z9C977AA   Make Model Years Engine Model Notes Notes Ford F-250 1994 to 2003 Ford 7.3L Power Stroke   F Series, Excursion, E Series Ford F-350 1994 to 2003 Ford 7.3L Power Stroke   F Series, Excursion, E Series Ford...

Upgrade your 94.5-95 7.3L Powerstroke with this rebuilt Stage 2 High Pressure Oil Pump from CNC Fabrication, LLC. Typically this pump will flow 30% more than a brand new Bosch 99.5-03 pump, which is plenty enough volume to sustain 250/100 hybrid injectors. 250/200's can...

Upgrade your 03-04 6.0L Powerstroke with this Stage 2 High Pressure Oil Pump from CNC Fabrication, LLC MODEL/YEAR(S): 2003-2004 ENGINE SIZE: 6.0L This is our mild performance pump and will outperform our Stage 1 pump by around 30% flow volume. Outfitted with a new...

Genuine Ford/Motorcraft ZD-30 Glow Plug 1994.5-2003 7.3L Powerstroke ZD30 Glow Plug: Sold individually or as a set (select quantity). Recommended by Ford Motor Company.  Keeps your Power Stroke® Diesel engine performing at its best. Recommended by Ford Motor Company quality manufacturing by Motorcraft® Connectors help...

This 1999.5-2003 high pressure oil reservoir gasket is a genuine OEM Ford part and carries a factory warranty YC3Z6619BA

Genuine Ford/Motorcraft o-rings.  Kit includes: 2 large O-rings (F4TZ6769C) 2 small O-rings (F4TZ6769A)  

These CNC Fabrication, LLC remanufactured Mild Street (200/30, 200/80, or 200/100) hybrid injectors will put new life back into your 94.5-03 7.3L Ford Powerstroke. Commonly called a Stage 2 or 3, these "Mild Street" 200cc hybrid injectors will typically produce around 450-500hp with proper...