Product Description: Injector Control Pressure (ICP) Sensor Fits 2003-2004 6.0L Powerstroke. OEM Numbers: 3C3Z9F838EA or 1845274C92    Alliant Power Warranty

Revitalize your 94.5-95 7.3L Ford Powerstroke with this Injector Pressure Regulator (IPR) - part number 2C3Z9C968BA! This high-quality high pressure oil pump (HPOP) IPR is a genuine OEM Ford part, ensuring a perfect fit and reliable performance for your vehicle. Engineered with precision, it...

Product Description: Exhaust Back Pressure (EBPS) Sensor OEM Numbers: 1840078C1   Make Model Years Engine Model Notes Notes Ford F-250 1994 to 1997 Ford 7.3L Power Stroke   F Series, E Series Ford F-350 1994 to 1997 Ford 7.3L Power Stroke   F Series, E Series Ford F-450...

Product Description: Fuel Filter Heater Element OEM Numbers: 1825186C91 Alliant Power fuel bowl heater element for 1994.5 to 1997 Ford Powerstroke trucks equipped with the robust 7.3L diesel engine. This high-quality fuel filter heater element is essential for maintaining optimal engine performance, particularly in...

QUALITY GUARANTEE:  All parts professionally examined and inspected for proper use. Transmissions are completely torn down and cleaned in a parts-washer at 200°F to remove all contaminants from the case. Clutches and steel alloys are made to factory thickness for the best heat distribution...

Edge Products replacement cable connecting OBDII to HDMI for the CS2 CTS2 CTS3  Features: Replacement for OBDII to HDMI cable Works with CTS2/CTS3/Trinity 2/Dashpaq Plus/Traildash3 OBDII connector snaps in place HDMI side connects to device

The S&B Filters KF-1051D Replacement Filter is for use with your 75-5105 S&B Cold Air Intake System. This innovative filter features a full round inlet radius that provides for a smooth transition while allowing for a larger filter with more surface area. The result...

FEATURES:  Larger Inlet Disposable Dry Filter  ISO 5011 Filtration Testing FILTER TYPE DRY FLANGE ID  4.5 FLANGE HEIGHT  1.25 TOP WIDTH 6 BASE WIDTH  6.65 ELEMENT HEIGHT 8.35 TYPE OF TOP POWER STACK: RUBBER TYPE OF FLANGE STRAIGHT      

FORD GENUINE MOTORCRAFT REPLACEMENT AIR FILTER FOR AIS (AIR INTAKE SYSTEM) KIT   FA-1757     2U2Z-9601-BA

The EAS Temperature Sensor is a -40-deg F to 300-deg F 1/8-inch NPT supplied with the connectors to plug directly into Edges Universal Sensor Input System. Using Edges Temperature Sensor you can monitor Transmission Temp., Differential/Axle Oil Temp., Oil Temp., Engine Coolant Temp., Air...

94.5-03 7.3L Powerstroke (Vin code F) upper gasket set- HS54204A CONTAINS THE FOLLOWING: RTV Valve Stem Seals Exhaust Manifold Gasket Timing Cover Gaskets/Seal Graphite Cylinder Head Gasket Graphite Exhaust Manifold Gasket HPOP gaskets and misc o-rings

After extensive R&D and torture testing the dual ball bearing chargers are back and better than ever. THIS UNIT ONLY FITS 94.5-97 OBS 7.3L. IF YOU ARE UNSURE OF FITMENT DO NOT ORDER WITHOUT CONFIRMING FITMENT. Recommended injectors: with 180/30%   Minimum injectors: STOCK Maximum injectors: 205/30% Features:...

This turbo will impress you at how well it runs! KC Turbo has torture tested it for longevity and proven its capability on the dyno. Recommended injectors: with 180cc/stock or 30%   Minimum injectors: Stock Maximum injectors: 180cc-30% This is a journal bearing turbo with a Borg Warner...

KC SUPER SPOOL TP38 TURBO .84 AR HOUSING - KCT-300454 This housing is a great upgrade over the very laggy factory 1.15 AR exhaust turbine housing.  Smaller AR housings result in much quicker spool up of the turbo whereas the stock larger 1.15 spools...

This turbo will impress you at how well it runs! KC Turbo has torture tested it for longevity and proven its capability on the dyno. You can expect much lower EGT's with the 1.0 A/R housing and quicker spool up with the .84 a/r housing....

KC Upgraded 99.5-03 GTP38 CHRA (center section) Features & Details: Drop in ready Upgraded 300x turbine wheel Upgraded KC billet compressor wheel Easily rebuildable Journal bearing design Quicker spool up More boost Increased HP and TQ Description: This replacement center section is designed to...

Upgrade your 1994.5-2003 7.3L Ford Powerstroke engine repair game with this precision-engineered CNC Fabrication valve spring compressor tool. Crafted by our in-house expert team, this tool guarantees seamless valve spring removal and installation. Whether you have your engine on a stand or it's in the...

CNC FABRICATION™ 94.5-03 Valve spring shim kit   MODEL/YEAR(S): 1994.5-2003 ENGINE SIZE: 7.3L Perfect prepackaged kit to shim your valve springs to the correct installed height and seat pressure.  16qty shims of .015, .030, .060 thickness