CNC Fabrication, LLC - CNC FABRICATION PRODUCTS

CNC FABRICATION PRODUCTS

Browse CNC FABRICATION PRODUCTS Products

Sort
View
 
Items 1-19 of 19
Description: This is a “SERVICE” that we take your known good IDM and modify it from the OEM voltage to 140v output.  This is "NOT" a repair, so do not send in a bad IDM.
Condition: New
Price: $150.00
Qty:

Description: Upgrade your fuel-system with our 4-line-feed fuel-line kit designed to eliminate the infamous #8 injector knock and fuel starvation in the #1 and #8 cylinders during higher RPMs and heavy throttle while towing.
Condition: New
Price: $250.00

Description: Exceeds OEM volume and pressure. These pumps go through rigorous bench testing and if they do not meet our standards these pumps are torn back down and gone through again.
Condition: New
Limited Supply: Only 6 Left!
Price: $850.00
Qty:

Description: This is our mild performance pump, and will outperform our Stage 1 pump by about 18-20% flow volume.
Condition: New
Not Available
Price: $1,050.00
Description: These bushings will help keep you from crushing/distorting the factory stamped sheet metal intake plenums when tightening your CAC boots.  Please specify what year of truck. 94-early 99 have a 2" inlet and late 99-03 have a 3" inlet.
Condition: New
Price: $45.00

Description: Replace your high-mileage (and expensive) OEM High Pressure Oil Pump lines with a CNC Fabrication™ upgrade!
Condition: New
Price: $135.00
Qty:

Description: Exceeds OEM volume. These pumps go through rigorous bench testing and if they do not meet the minimum 5gpm they are torn back down and gone through again.
Condition: New
Limited Supply: Only 1 Left!
Price: $475.00

Description: These pumps go through rigorous bench testing and normally flow 30% more volume than a new Bosch 99.5-03 pump.
Condition: New
Limited Supply: Only 4 Left!
Price: $650.00

Description: Replace your high-mileage (and expensive) OEM High Pressure Oil Pump lines with a CNC Fabrication™ upgrade!
Condition: New
Price: $175.00
Qty:

Description: Exceeds OEM volume. These pumps go through rigorous bench testing and if they do not meet the minimum 5gpm they are torn back down and gone through again.
Condition: New
Price: $475.00

Description: These pumps go through rigorous bench testing and normally flow 30% more volume than a new Bosch 99.5-03 pump.
Condition: New
Limited Supply: Only 7 Left!
Price: $650.00

Description: CNC FABRICATION early 99-03 7.3L Powerstroke Fuel Bowl Delete Manifold. This retro-fit manifold is a direct swap for our 4 line feed fuel line kit to remove the factory fuel bowl. COMES WITH FITTINGS
Condition: New
Price: $120.00
Free Shipping!

Description: Replace your high-mileage (and expensive) OEM High Pressure Oil Pump lines with the #1 selling CNC Fabrication™ upgraded HPOP lines!
Condition: New
Price: $135.00
Qty:

Description: Replace your high-mileage (and expensive) OEM High Pressure Oil Pump lines with the #1 selling CNC Fabrication™ upgraded HPOP lines!
Condition: New
Price: $175.00
Qty:

Description: Authentic CNC Fabrication, LLC FlexFit baseball cap.
Condition: New
Price: $25.00

Description: Authentic CNC Fabrication, LLC hoodie. This is a high quality hoodie that will last a long time with a 50/50 Cotton and Polyester blend.
Condition: New
Price: $30.00

Description: CNC FABRICATION 7.3L POWERSTROKE HPOP (HPx) CROSSOVER LINE
Condition: New
Price: $60.00
Qty:

Description: The air intake heater, which is found in ’99.5 and up 7.3 Powerstrokes, blocks close to 20% of the air path in the intake manifold and creates significant turbulence in the airflow going into...More Details »
Condition: New
Price: $17.00
Qty:

Description: Authentic CNC Fabrication, LLC T-shirt. This is a high quality shirt that will last a long time, and is 100% Cotton.
Condition: New
Price: $18.00

Items 1-19 of 19