SCT X4 50 State Legal Power Flash Programmer - 7015PEO
Driven off the lot, a vehicle's computer is factory-calibrated for economy performance. Engineered with the average driver in mind, rather than a performance enthusiast, this...
Vendor:
SCT Performance
SKU:
7015PEO
Availability:
Many In Stock
Product Type:
2011-2017, 2017+, Tuning & Monitors
- $399.00
- $399.00
- Unit price
- / per
Please hurry! Only 0 left in stock
10 customers are viewing this product
Couldn't load pickup availability
Return Policy
Within 21 Days
Return shipping is the sole responsibility of the customer.
CNC Fabrication, LLC™ will accept items to be returned or exchanged, that are in new, unopened, unworn, unaltered, and free of damages by the customer within 21 days of receipt per the tracking number. Items returned after 21 days of receipt will incur a minimum 10% restocking fee (depending on item). We will allow a full refund for "store credit" if a customer does not want to incur the minimum 10% restock fee, but CNC Fabrication, LLC still must be notified within the 21 day grace period.
Items MUST be returned with a copy of the original receipt and in the original packaging it was received in by the customer, if not, this may significantly delay the time to process the refund.
Restocking fee may be more if customer has caused any type of damage to the product, packaging, or missing parts that prohibits the product to be re-sold “as new” to the next potential customer. If the product is returned via a shipper, it is the responsibility of the original purchaser to be sure the product is secure in the return package to avoid any potential damage. If damage occurs, the original purchaser may not receive any refund whatsoever.
**No returns or refunds will be accepted on electrical items or special order items**
Items that are “intangible” (I.E. tuning for performance chips or programmers) are not refundable due to the nature of the product.
If you would like to start a return, please request an RMA.
California Residents:
Prop 65 Warning:
Cancer and Reproductive Harm
The California Office of Environmental Health Hazard Assessment established this website to provide the public with information on chemicals, products and places often associated with Proposition 65 warnings. These warnings inform Californians about their exposures to chemicals that cause cancer, birth defects or other reproductive harm. Visiting this website regularly will help you learn about these chemicals and how you can reduce your exposure to them. We will be adding new information frequently. www.p65warnings.ca.gov
Driven off the lot, a vehicle's computer is factory-calibrated for economy performance. Engineered with the average driver in mind, rather than a performance enthusiast, this generic tune leaves valuable horsepower & torque 'hidden within' your vehicle and makes for a mediocre driving experience.
FEATURES:
- Saves Factory Tune
- Full Color LCD Screen
- User Adjustable Tune Options
- User Adjustable Vehicle Parameters
- High Speed Data Logging and Monitoring
- Reads and Removes Diagnostic Trouble Codes (DTC)
- Preloaded Tunes to Add Horsepower, Torque, and improving drivability
- ONLY FOR 2011-2019 Ford 6.7L Powerstroke - C.A.R.B EO# D-784-11
- Increased Horsepower & Torque: Increases your vehicle's Horsepower, Torque, Throttle Response and even Fuel Mileage.
- Full-Color LCD Display: w/auto dim feature and user adjustable portrait/landscape modes.
- Custom Tuning: can store up to 10 customizations for on-the-go tune selection.
- Logging & Monitoring: w/ dual analog inputs track your vehicle's PCM and sensor data (in real-time) on-screen or using SCT's LiveLink data logging software.
- Compact Design: styled after the popular x3 programmer, the new x4 is smaller and more compact. (2.75" wide x 5.5" tall)
-
Clear DTCs: Reads & Clears PCM Diagnostic Trouble Codes.
Available PID List
6.0L & 7.3L Ford Diesel - ACCEL PEDAL POSITION
- AIR FLOW #/MIN
- BAROMETRIC PRESSURE IN HG
- BATTERY VOLTAGE
- COMMANDED GEAR
- COOLANT TEMP
- ENGINE OIL TEMP F
- INJECTION CONTROL PRESSURE
- INJECTOR PULSE WIDTH
- INTAKE AIR TEMP
- LOAD
- TURBO BOOST
- MAP
- RPM
- TORQUE CONVERTER CLUTCH DUTY CYCLE
- TRANS TEMP
- VEHICLE SPEED
- VGT DUTY CYCLE
- FICM_IGNITION
- FICM_LOGIC_POWER
- FICM_MAIN_INTERNAL_INJECTOR_PWR
6.4L Ford Diesel - BAROMETRIC PRESSURE KPA
- BATTERY VOLTAGE
- COOLANT TEMP
- DPF REGEN STATUS
- EGT
- ENGINE LOAD
- ENGINE OIL TEMP
- INTAKE AIR TEMP
- MAF
- PEDAL POSITION
- RPM
- SECONDARY EGT
- TRANS TEMP TCM
- TURBO BOOST
- VEHICLE SPEED
6.7L Ford Diesel - ABSOLUTE LOAD IN PERCENT
- ACCEL PEDAL POSITION D
- ACCEL PEDAL POSITION E
- ACCEL PEDAL POSITION VOLTS
- AMBIENT AIR TEMP C
- AMBIENT AIR TEMP F
- AVERAGE DISTANCE BETWEEN REGEN
- BAROMETRIC PRESSURE
- BATTERY VOLTAGE
- DISTANCE SINCE DTC CLEARED KM
- DISTANCE SINCE DTC CLEARED MILE
- DISTANCE SINCE LAST REGEN
- DPF SOOT MASS
- DTC COUNT
- DTC COUNT TCM
- ENGINE COOLANT TEMP C
- ENGINE COOLANT TEMP F
- ENGINE OIL TEMP
- FUEL LEVEL SENSOR
- FUEL RATE
- GEAR COMMANDED
- INTAKE AIR TEMP VOLTS
- MAF FREQUENCY
- MAP ABSOLUTE KPA
- REDUCTANT LINE PRESSURE
- REDUCTANT UREA LEVEL
- RPM
- RUN TIME
- TCC SOLENOID PRESSURE KPA TCM
- TRANS FLUID TEMP F TCM
- TURBO BOOST
- VEHICLE SPEED MPH TCM
* This product is not legal for sale or use in California on pollution controlled motor vehicles.
Documents and Instructions
Brand: SCT PerformanceManufacturer Part Number: 7015PEOLength (in): 13Width (in): 9Height (in): 3Weight (lbs): 3
Returns Policy
Return shipping is the sole responsibility of the customer.
CNC Fabrication, LLC™ will accept items to be returned or exchanged, that are in new, unopened, unworn, unaltered, and free of damages by the customer. Items returned will incur a minimum 10% restocking fee (depending on item). We will allow a full refund for "store credit" if a customer does not want to incur the minimum 10% restock fee.
Items MUST be returned with a copy of the original receipt and in the original packaging it was received in by the customer, if not, this may significantly delay the time to process the refund.
Restocking fee may be more if customer has caused any type of damage to the product, packaging, or missing parts that prohibits the product to be re-sold “as new” to the next potential customer. If the product is returned via a shipper, it is the responsibility of the original purchaser to be sure the product is secure in the return package to avoid any potential damage. If damage occurs, the original purchaser may not receive any refund whatsoever.
**No returns or refunds will be accepted on electrical items or special order items**
Items that are “intangible” (I.E. tuning for performance chips or programmers) are not refundable due to the nature of the product. If you would like to start a return, please request an RMA.
Shipping
All orders processed during regular business hours (Monday - Friday) 8am - 5pm (EST). Processed orders are usually shipped within the same business day provided order details are complete, within the shipping hours (8am-3pm), and there are no issues with payment. In some cases order may not go out until the next day due to how many order come in through the day. CNC Fabrication, LLC also reserves the right to override/change the customer's choice of shipping carrier in lieu to try and get the order to the customer as soon as possible. PLEASE be sure you enter the complete and correct shipping address or your package may be delayed or potentially delivered to the wrong address. CNC Fabrication, LLC is not liable for any order/package that is delivered to an incorrect customer provided address.
FREE SHIPPING: available on select items to the Continental US (lower 48 states)could be USPS or UPS depending on shipping cost and speed; does not include overnight or express service.
PRIORITY EXPRESS SHIPPING: does not guarantee overnight. It is 1-2 day, but usually 1 day.
CUSTOM SHIPPING: If you require custom shipping solution or have any questions, please Contact Customer Service.
SHIPPING DELAYS: We will do our best to get products out the door in a timely manner, once the items are picked up by the carrier we have no control over any delays they may encounter such as weather, routing issues, equipment breakdown etc.
DAMAGED ITEMS: Items damaged in shipping must be reported to CNC Fabrication, LLC within 7 days of the delivery so we can file the necessary paperwork with the carrier. Please keep all packaging and take pictures of the damage to email us in the process for ours and the carrier's records. Please DO NOT contact the carrier directly for damage; This will significantly delay the time to process the damage claim with the carrier.
Related Products
Recently Viewed Products
- Choosing a selection results in a full page refresh.