SCT BDX Performance Programmer - 40490
Its sleek design, full-color display and customizable gauges help track, data log, and adjust powertrain performance to deliver more horsepower and torque when it’s needed...
- $419.00
- $419.00
- Unit price
- / per
Please hurry! Only 0 left in stock
10 customers are viewing this product
Couldn't load pickup availability
Return Policy
Within 21 Days
Return shipping is the sole responsibility of the customer.
CNC Fabrication, LLC™ will accept items to be returned or exchanged, that are in new, unopened, unworn, unaltered, and free of damages by the customer within 21 days of receipt per the tracking number. Items returned after 21 days of receipt will incur a minimum 10% restocking fee (depending on item). We will allow a full refund for "store credit" if a customer does not want to incur the minimum 10% restock fee, but CNC Fabrication, LLC still must be notified within the 21 day grace period.
Items MUST be returned with a copy of the original receipt and in the original packaging it was received in by the customer, if not, this may significantly delay the time to process the refund.
Restocking fee may be more if customer has caused any type of damage to the product, packaging, or missing parts that prohibits the product to be re-sold “as new” to the next potential customer. If the product is returned via a shipper, it is the responsibility of the original purchaser to be sure the product is secure in the return package to avoid any potential damage. If damage occurs, the original purchaser may not receive any refund whatsoever.
**No returns or refunds will be accepted on electrical items or special order items**
Items that are “intangible” (I.E. tuning for performance chips or programmers) are not refundable due to the nature of the product.
If you would like to start a return, please request an RMA.
California Residents:
Prop 65 Warning:
Cancer and Reproductive Harm
The California Office of Environmental Health Hazard Assessment established this website to provide the public with information on chemicals, products and places often associated with Proposition 65 warnings. These warnings inform Californians about their exposures to chemicals that cause cancer, birth defects or other reproductive harm. Visiting this website regularly will help you learn about these chemicals and how you can reduce your exposure to them. We will be adding new information frequently. www.p65warnings.ca.gov
Its sleek design, full-color display and customizable gauges help track, data log, and adjust powertrain performance to deliver more horsepower and torque when it’s needed most. Select from multiple SCT tuning levels or load up to 20 custom tune files from one of our thousands of custom tuning dealers worldwide. Direct-to device updates and custom tune delivery over WiFi means cables and computers are a thing of the past. A variety of customizable vehicle functions from timing and rev limiter adjustments, to wheel and tire size calibration enable the BDX to custom tailor your vehicle to your unique standards.
FEATURES:
- Backs Up Factory Tune: Stores your vehicles factory tune file for easy restoration back to the stock program.
- Built-In Wifi for easy updates: Built-in Wifi allows you to easily attach to your local area wireless network to download device updates.
- Cloud Custom Tunes: Connect to Wi-Fi and your Custom Tuning Dealer can send Custom Tunes direct to your device over the cloud.
- Data Logging: Need to monitor your vehicle's engine parameters? No need for a separate monitoring device. View & record your vehicle's PCM data on the device or on a PC.
- Installs quickly & easily via your vehicle's OBDII port.
- Monitor Engine Parameters in Real-Time via the Large Backlit LCD Screen
- Monitoring: Need to monitor your vehicle's engine parameters? No need for a separate monitoring device. View & record your vehicle's PCM data on the device or on a PC.
- Reads & Clears PCM Diagnostic Trouble Codes.
- Stores up to 20 custom tune files created by your local SCT Custom Tuning Dealer.
WHAT YOU CAN ADJUST
- **Adjustable Options vary for each vehicle and are not available on all vehicles**
- Disable auto start/stop.
- Axle Ratio: Correct the vehicle speedometer (and fuel efficiency calculations) if you have changed the gear ratio on your vehicle. If no gear ration modifications have been made to the vehicle, then choose the stock setting when the tuner prompts you to choose a gear ratio. This will ensure that no modifications are made to the stock program.
- CMCV Delete: Allows you to disable the CMCV (Charge Motion Control Valve) in your vehicles PCM to prevent a Check Engine light and other issues associated with removing the CMCV plates in your vehicle.
- Disable DOD: Allows you to disable / enable the Displacement On Demand functions of your vehicles PCM.
- Exhaust Y Pipe: Support for Kooks High Flow Y Pipes
- Fan Control: Lowers the Temperature at which the Fan turns on.
- Fuel Injectors: Allows you to adjust for different sized fuel injectors.
- Global Spark: Allows addition or removal of timing across all RPM ranges
- Headers: Allows adjustment for Longtube headers
- Idle Adjust: Enable and select a value for Engine Idle position. This is a great feature for keeping voltage in the vehicle up while running auxiliary electronics off of the vehicle’s power system.
- Intake Airbox: Allows an aftermarket intake to be run on the vehicle without a Check Engine Light. For Intake Kits that require tuning, this will provide a selection of available intake kits.
- Mass Air Meter (MAF): Allows you to select from different aftermarket MAF (Mass Air Meters).
- Mobile Regeneration: Lower soot accumulation in the DPF by manually starting a regeneration at highway speeds.
- Multiple Displacement System (MDS): Enabling the MDS (Multiple Displacement System) initiates a fuel saving 4-cylinder engine mode and disables additional engine cylinders.
- RPM Based Spark: Allows you to Add or Remove Timing by RPM Range. (0-2000)(2000-4000)(4000-8000)
- Rev Limiter: Regulate the highest RPM that an engine can reach before the engine is electronically limited. Increasing the RPM limit is recommended only for racing purposes. One of the most important ways to protect your engine from damage is to keep the RPMs from going too high.
- Speed Limiter: Change the top speed that the vehicle will reach before the engine automatically limits the power needed to go faster.
- Stationary Regeneration: Lower soot accumulation in the DPF by manually starting a regeneration while parked.
- TPMS: Change or disable the Tire Pressure Monitoring System.
- Throttle Body: Compensates for aftermarket Throttle Bodies (BBK 65/85/90 MM)
- Throttle Sensitivity: Adjust the throttle sensitivity for stock, fuel saver, performance and extreme modes.
- Tire Size: Correct the speedometer if you have changed your tire size from stock.
- Torque Reduction: Reduce torque durning shifting (makes shift more firm)
- Traction Control: Allows you to disable the vehicles Traction Control without using the button in the vehicle.
- Transmission Shift Firmness: Change the shift firmness of an automatic transmission.
- Transmission Shift Points: Change the RPMs at which an automatic transmission will change gears.
Documents and Instructions
Brand: SCT PerformanceManufacturer Part Number: SCT-BDX-40490Length (in): 13Width (in): 9Height (in): 3Weight (lbs): 3
Returns Policy
Return shipping is the sole responsibility of the customer.
CNC Fabrication, LLC™ will accept items to be returned or exchanged, that are in new, unopened, unworn, unaltered, and free of damages by the customer. Items returned will incur a minimum 10% restocking fee (depending on item). We will allow a full refund for "store credit" if a customer does not want to incur the minimum 10% restock fee.
Items MUST be returned with a copy of the original receipt and in the original packaging it was received in by the customer, if not, this may significantly delay the time to process the refund.
Restocking fee may be more if customer has caused any type of damage to the product, packaging, or missing parts that prohibits the product to be re-sold “as new” to the next potential customer. If the product is returned via a shipper, it is the responsibility of the original purchaser to be sure the product is secure in the return package to avoid any potential damage. If damage occurs, the original purchaser may not receive any refund whatsoever.
**No returns or refunds will be accepted on electrical items or special order items**
Items that are “intangible” (I.E. tuning for performance chips or programmers) are not refundable due to the nature of the product. If you would like to start a return, please request an RMA.
Shipping
All orders processed during regular business hours (Monday - Friday) 8am - 5pm (EST). Processed orders are usually shipped within the same business day provided order details are complete, within the shipping hours (8am-3pm), and there are no issues with payment. In some cases order may not go out until the next day due to how many order come in through the day. CNC Fabrication, LLC also reserves the right to override/change the customer's choice of shipping carrier in lieu to try and get the order to the customer as soon as possible. PLEASE be sure you enter the complete and correct shipping address or your package may be delayed or potentially delivered to the wrong address. CNC Fabrication, LLC is not liable for any order/package that is delivered to an incorrect customer provided address.
FREE SHIPPING: available on select items to the Continental US (lower 48 states)could be USPS or UPS depending on shipping cost and speed; does not include overnight or express service.
PRIORITY EXPRESS SHIPPING: does not guarantee overnight. It is 1-2 day, but usually 1 day.
CUSTOM SHIPPING: If you require custom shipping solution or have any questions, please Contact Customer Service.
SHIPPING DELAYS: We will do our best to get products out the door in a timely manner, once the items are picked up by the carrier we have no control over any delays they may encounter such as weather, routing issues, equipment breakdown etc.
DAMAGED ITEMS: Items damaged in shipping must be reported to CNC Fabrication, LLC within 7 days of the delivery so we can file the necessary paperwork with the carrier. Please keep all packaging and take pictures of the damage to email us in the process for ours and the carrier's records. Please DO NOT contact the carrier directly for damage; This will significantly delay the time to process the damage claim with the carrier.
Related Products
Recently Viewed Products
- Choosing a selection results in a full page refresh.