AutoEnginuity Domestic ScanTool Bundle - SP05
Although Ford does implement the largest subset of the OBDII standard, the typical vehicle only supports 20 - 40 sensors and is limited to emissions...
- $809.95
- $809.95
- Unit price
- / per
Please hurry! Only 0 left in stock
10 customers are viewing this product
Couldn't load pickup availability
Return Policy
Within 21 Days
Return shipping is the sole responsibility of the customer.
CNC Fabrication, LLC™ will accept items to be returned or exchanged, that are in new, unopened, unworn, unaltered, and free of damages by the customer within 21 days of receipt per the tracking number. Items returned after 21 days of receipt will incur a minimum 10% restocking fee (depending on item). We will allow a full refund for "store credit" if a customer does not want to incur the minimum 10% restock fee, but CNC Fabrication, LLC still must be notified within the 21 day grace period.
Items MUST be returned with a copy of the original receipt and in the original packaging it was received in by the customer, if not, this may significantly delay the time to process the refund.
Restocking fee may be more if customer has caused any type of damage to the product, packaging, or missing parts that prohibits the product to be re-sold “as new” to the next potential customer. If the product is returned via a shipper, it is the responsibility of the original purchaser to be sure the product is secure in the return package to avoid any potential damage. If damage occurs, the original purchaser may not receive any refund whatsoever.
**No returns or refunds will be accepted on electrical items or special order items**
Items that are “intangible” (I.E. tuning for performance chips or programmers) are not refundable due to the nature of the product.
If you would like to start a return, please request an RMA.
California Residents:
Prop 65 Warning:
Cancer and Reproductive Harm
The California Office of Environmental Health Hazard Assessment established this website to provide the public with information on chemicals, products and places often associated with Proposition 65 warnings. These warnings inform Californians about their exposures to chemicals that cause cancer, birth defects or other reproductive harm. Visiting this website regularly will help you learn about these chemicals and how you can reduce your exposure to them. We will be adding new information frequently. www.p65warnings.ca.gov
Although Ford does implement the largest subset of the OBDII standard, the typical vehicle only supports 20 - 40 sensors and is limited to emissions powertrain. Using the enhanced Ford interface, a typical Ford vehicle will support 200 - 300 sensors within half a dozen systems; that's essential systems such as ABS, airbags, GEM, ICM, etc.
Our enhanced Ford interface coverage is only matched by factory tools; we have support for 8,900+ sensors selected from 150+ systems. Support includes ISO, SCP, CAN, MCAN, and CAN 14229 controllers. The Ford enhanced interface has support for Ford of Europe diesel models such as Ka, Mondo, Galaxy, Fairlane, etc. Finally, our Ford enhanced has support for non-CAN and CAN 1300+ bi-directional commands and dozens of system-level tests. With bi-directional controls, you will no longer be relegated to being just an observer in the operation of the vehicle--now you can take control of its operation.
System Tests:
- PATS Timed Key Programming ('96 - '08)
- KOEO
- KOER
- Power Balance (CAN-based models)
- EVAP Bay Test
- Service Bleed (Non-CAN support not available with ProLine currently)
- Buzz Injector
- Cylinder Contribution Test
- Switch Test
- Glow Plug Test
- System Self-Test
- Low - and High Speed Fan
- All Outputs On/Off
- Injector Coding (1.8L and 2.0L)
- KAM Reset
- Misfire Monitor Neutral Profile Correction
- Tire Size Programming up to 40" ('99-'03 7.3L, and '04-'07 6.0L trucks)
- IVD Initialization
- Steering Angle / Yaw Rate / Acceleration Sensor Reset ('03 Explorer and Lincoln LS)
- Passenger Seat ReZero and Passenger Weight Reset
- Power Seat Calibration Test
- Audio Network Communication Test
- Vehicle In-Motion IO Test
- Front Wiper Self-Test
- Rear Wiper Self-Test
- Diesel Particulate Filter Reset, Clear EGR Adaptive Tables, and Clear Fuel Injector Adaptive Tables
- DPF Regeneration, SCR Dosing Measurement Test, SCR Visual Leak Test
- BMS Reset
- TPMS Sensor Training Mode
- Crash Reset Status (Transit '15+)
- Electronic Parking Brake Maintenance Mode (Fusion HEV '14+)
- DO NOT USE ON '96 - '03 VILLAGER, DAMAGE TO THE CONNECTOR MAY OCCUR.
This enhanced interface supports 8,400+ sensors selected from the engine, transmission, body, and chassis systems. For you tuners out there, our enhanced GM interface gives you access to the Crank Variation Learned test for most vehicles.
Also, with our enhanced GM coverage Engine and Transmission support for Workhorse '04 - '08 MY21 vehicles (P42 Series, W22 Series, W24 Series, W52 Series, LF72 Series, P32 Series, W18 Series, FE20 Series, W42 Series).
Our interface coverage is only matched by factory tools; we have support for 6,000+ sensors selected from all 100 systems. Finally, our enhanced GM has support for 2,000+ bi-directional commands and key system-level tests. With bi-directional controls, you will no longer be relegated to being just an observer in the operation of the vehicle--now you can take control of its operation.
System Tests:
- ABS Automated Bleed Routine
- Crank Variation Learn (click here for supported vehicles)
- Injector Flow Rate Programming (CAN-based Diesels)
- Key Fob Programming (click here for supported vehicles)
- SDM Setup and Part Number Programming (click here for supported vehicle)
- Idle Learn
- TDC Learn
- Tire Pressure Sensor ID Programming
- For more information on supported tests and coverage
from the powertrain, body, chassis, and transmission system. It includes hi- and low-speed sensor support giving you more sensors and faster throughput then our competitors. This enhanced interface comes with its own hardware interface specifically designed for Chrysler SCI and CCD based controllers. By doing a stand-alone interface we can offer you more SCI coverage then our competitors who are limited by electrical issues with generic OBD-II. Also supported is the CR2 and CR3 Sprinter ('04 - '06), Jeep Liberty Diesel ('05 - '06), diesel Cummins engines, and the Venom equipped Vipers ('08 - '17).
PLEASE NOTE: Due to Chrysler's addition of a Security Gateway starting in MY18 vehicles that have it installed will require you to get a separate license to be allowed to perform advanced features like clearing DTCs, actuations, and system test.
SBEC/JTEC System Tests:
- EGR System Test
- EVAP System Monitor Service Test
- Erase All DTC Fault Codes
- Generate Full Field Test
- Gov & 3-4 Shift Valve Test - JTEC Only
- Leak Detect Pump Test
- Purge Vapors Test
- Reset All Adaptive Memory Fuel Cells
- Reset All Non-Volatile Memory
- Reset CAM/Crank Misalignment
- Reset CAM, Crank, and Sync Status Record
- Reset Duty Cycle Monitor
- Reset Engine Running Time Record
- Reset Fuel Shut-off Record
- Reset Intake Airflow Control Stepper Motor Position
- Reset Trip Information
- Set Sync Signal - JTEC Only
- Set Minimum Throttle Position to Maximum
- Torque Converter Clutch Test - JTEC Only
VPW-based System Tests:
- ABS Bleed Brakes (EBC325, Mk20e, and Mk25e)
- Tire Size Programming
- Transmission Rear/Front Wheel Brake Torque Test
- Transmission Pump Test
- Transmission Quick Learn
- Transmission TCC Break-In Test
- Transmission Front Wheel Pinion Factor
NGC System Tests:
- Injector Kill Test
- NVLD Force Monitor Test
- Purge Vapor Tests
- Reset all On-Board Control Units
- Report Part Number
- Report Reflash Program Counter
CAN-based Module System Test and Configuration Support:
- ABS Brake Bleed
- ABS Initialize ECU
- Auto Door Locks
- Beltminder
- Cylinder Performance Test
- Current VIN Programming
- CAM and Crank Relearn
- DRL Setup Configuration
- EATX Quick Learn
- Engine On Odometer
- IMA Programming Injectors
- Injector Quantity Adjustment
- Module Configuration Setup
- Retrieve Installed Module VINs
- Tire Pressure Sensor ID Programming
- Tire Pressure Trigger Configuration (NOTE: Not supported on vehicles where TPMS is handled via the RFH)
- Tire Pressure Calibration (NOTE: Not supported on vehicles where TPMS is handled via the RFH)
- Tire Size Programming
- Click here for more System Test/Configuration break down and for Module Variant coverage
COPYRIGHT © 2003-2017 AUTOENGINUITY®, L.L.C. ALL RIGHTS RESERVED. "AUTOENGINUITY", "UNLEASH THE DIAGNOSTICS POWER BUILT INTO YOUR VEHICLE", AND "GET MORE DONE WITH A SINGLE SCAN TOOL" ARE REGISTERED TRADEMARKS OF AUTOENGINUITY, L.L.C. (77/261,645, 77/261,623, 77/261,639)
Brand: Auto EnginuityManufacturer Part Number: SP05Length (in): 9.0Width (in): 8.0Height (in): 3.0Weight (lbs): 4
Returns Policy
Return shipping is the sole responsibility of the customer.
CNC Fabrication, LLC™ will accept items to be returned or exchanged, that are in new, unopened, unworn, unaltered, and free of damages by the customer. Items returned will incur a minimum 10% restocking fee (depending on item). We will allow a full refund for "store credit" if a customer does not want to incur the minimum 10% restock fee.
Items MUST be returned with a copy of the original receipt and in the original packaging it was received in by the customer, if not, this may significantly delay the time to process the refund.
Restocking fee may be more if customer has caused any type of damage to the product, packaging, or missing parts that prohibits the product to be re-sold “as new” to the next potential customer. If the product is returned via a shipper, it is the responsibility of the original purchaser to be sure the product is secure in the return package to avoid any potential damage. If damage occurs, the original purchaser may not receive any refund whatsoever.
**No returns or refunds will be accepted on electrical items or special order items**
Items that are “intangible” (I.E. tuning for performance chips or programmers) are not refundable due to the nature of the product. If you would like to start a return, please request an RMA.
Shipping
All orders processed during regular business hours (Monday - Friday) 8am - 5pm (EST). Processed orders are usually shipped within the same business day provided order details are complete, within the shipping hours (8am-3pm), and there are no issues with payment. In some cases order may not go out until the next day due to how many order come in through the day. CNC Fabrication, LLC also reserves the right to override/change the customer's choice of shipping carrier in lieu to try and get the order to the customer as soon as possible. PLEASE be sure you enter the complete and correct shipping address or your package may be delayed or potentially delivered to the wrong address. CNC Fabrication, LLC is not liable for any order/package that is delivered to an incorrect customer provided address.
FREE SHIPPING: available on select items to the Continental US (lower 48 states)could be USPS or UPS depending on shipping cost and speed; does not include overnight or express service.
PRIORITY EXPRESS SHIPPING: does not guarantee overnight. It is 1-2 day, but usually 1 day.
CUSTOM SHIPPING: If you require custom shipping solution or have any questions, please Contact Customer Service.
SHIPPING DELAYS: We will do our best to get products out the door in a timely manner, once the items are picked up by the carrier we have no control over any delays they may encounter such as weather, routing issues, equipment breakdown etc.
DAMAGED ITEMS: Items damaged in shipping must be reported to CNC Fabrication, LLC within 7 days of the delivery so we can file the necessary paperwork with the carrier. Please keep all packaging and take pictures of the damage to email us in the process for ours and the carrier's records. Please DO NOT contact the carrier directly for damage; This will significantly delay the time to process the damage claim with the carrier.
Related Products
Recently Viewed Products
- Choosing a selection results in a full page refresh.