These CNC Fabrication, LLC NEW Mild Street (238/80, 238/100, or 238/200) hybrid injectors will put new life back into your 94.5-03 7.3L Ford Powerstroke
Commonly called a Stage 3, these brand new "Hot Street" 238cc hybrid injectors will typically produce around 500-550hp with proper supporting modifications depending on the year of your truck. 80% nozzles will give better towing capabilities and run cleaner, 100% nozzles will give a more top end power, more low end torque (good balance of work and fun), 200% nozzles will give the most power but expect EGT's to be higher. These are by far the most popular sized injector to daily drive and give a Camaro a run for its money. Mainly because a T4 turbo mount is not "necessary", nor are billet rods and a plate girdle.
**See Suggested Modifications tab for turbo, fuel, and hpop upgrades**
Features:
- Decent for towing, or just wanting a sizeable power increase
- 100% Brand New Injectors
- 80%, 100%, or 200% over nozzles
- Each set of injectors will come with flow sheet test results
- Tested on the newest Hartridge flow bench using the latest injector technology
- Free Ground Return Shipping
Shipping: Lead times may vary depending on workload and availability of new injector bodies from Alliant Power
**PLEASE ALLOW 3-5 DAYS AFTER YOUR CORE(S) HAS BEEN RECEIVED FOR OUR ACCOUNTING TEAM TO PROCESS YOUR REFUND. EXPECT DELAYS IF YOU DO NOT FILL OUT THE PAPERWORK PROPERLY**
**See Core Policy >>> Here <<<**
Warranty:
Covered by CNC Fabrication's limited lifetime warranty. Warranty covers any damages done during shipping, prior to installation, and if all installation steps were followed. Warranty VOID if damage is done due to improper care of the purchaser's vehicle, improper fuel, etc. Warranties are non-transferable, and only offered to the original purchaser.
Suggested Modifications
94.5-97 Trucks: We highly recommend upgrading your turbo, fuel system, hpop, and adding an intercooler. These will require custom tuning. Stage 1 hpop will work with these injectors, but our stage 2 will perform slightly better. Stock fuel and hpop (15*) system will not support these.
Recommended Turbo Options:
- KC Turbo KC300X Stage 3 66/73 94-97 7.3L Turbo - 300230
- Borg Warner s366sxe
- Borg Warner s369sxe
- BORG WARNER S467.7FMW T4 TURBO - 178855
- BANKS POWER 94-97 7.3L Techni-Cooler intercooler system - 25970
Recommended Fuel Upgrade:
- CNC Fabrication 94.5-E99 7.3L 4-Line Feed Fuel Line Kit - 7.3-OBSE99-VMFK
- AEM 400LPH Fuel pump (AN) - 50-1005
- AIRDOG II-5G '99-03 7.3L Air/Fuel Separation System - A7SABF592
- 94.5-03 7.3L Fuel System Bundle - 7.3-BUND-FUEL
Recommended Hpop Upgrade:
- Bosch 99.5-03 7.3L High Pressure Oil Pump - BOSC-HP008X (Cannot be used on 94.5-95 model years)
- CNC Fabrication 94.5-95 7.3L Stage 1 HPOP - 7.3-HPOP-STG1-94.5-95
- CNC Fabrication 96-03 7.3L Stage 1 HPOP - 7.3-HPOP-STG1-96-03
- CNC Fabrication 94.5-95 7.3L Stage 2 HPOP - 7.3-HPOP-STG2-94.5-95
- CNC Fabrication 96-03 7.3L Stage 2 HPOP - 7.3-HPOP-SGT2-96-03
98.5-03 Trucks: These are a significant power upgrade. We highly suggest a turbo upgrade and hpop upgrade. Custom tuning is required. Note the links for Early '99 trucks. Stock fuel system will not fully support this injector.
Recommended Turbo Options:
- KC Turbo KC300X Stage 3 66/73 (0.84 A/R) Late 99-03 7.3L Turbo - 300907
- KC Turbo KC300X Stage 3 66/73 (1.0 A/R) Late 99-03 7.3L Turbo - 300232
- KC Turbo KC300X Stage 3 66/73 Early 99 7.3L Turbo - 300231
- Borg Warner s364.5sxe - More for those who tow more and run a lower HP tune file
- Borg Warner s366sxe
- Borg Warner s369sxe
- BORG WARNER S467.7FMW T4 TURBO - 178855
Recommended Fuel Upgrade:
- CNC Fabrication 99-03 7.3L 4-Line Feed Fuel Line Kit - 7.3-SD-BRFK
- CNC Fabrication Late 99-03 7.3L 4-Line Feed Fuel Line Kit - 7.3-SD-VMFK
- AEM 400LPH Fuel pump (AN) - 50-1005
- AIRDOG II-5G '99-03 7.3L Air/Fuel Separation System - A7SABF592
- 94.5-03 7.3L Fuel System Bundle - 7.3-BUND-FUEL
Recommended Hpop Upgrade:
- Bosch 99.5-03 7.3L High Pressure Oil Pump - BOSC-HP008X
- CNC Fabrication 96-03 7.3L Stage 1 HPOP - 7.3-HPOP-STG1-96-03
- CNC Fabrication 96-03 7.3L Stage 2 HPOP - 7.3-HPOP-SGT2-96-03
Brand: CNC FabricationManufacturer Part Number: 422060, 422061, 422062Length (in): 17.0Width (in): 11.0Height (in): 7.0Weight (lbs): 25.0
Returns Policy
Return shipping is the sole responsibility of the customer.
CNC Fabrication, LLC™ will accept items to be returned or exchanged, that are in new, unopened, unworn, unaltered, and free of damages by the customer. Items returned will incur a minimum 10% restocking fee (depending on item). We will allow a full refund for "store credit" if a customer does not want to incur the minimum 10% restock fee.
Items MUST be returned with a copy of the original receipt and in the original packaging it was received in by the customer, if not, this may significantly delay the time to process the refund.
Restocking fee may be more if customer has caused any type of damage to the product, packaging, or missing parts that prohibits the product to be re-sold “as new” to the next potential customer. If the product is returned via a shipper, it is the responsibility of the original purchaser to be sure the product is secure in the return package to avoid any potential damage. If damage occurs, the original purchaser may not receive any refund whatsoever.
**No returns or refunds will be accepted on electrical items or special order items**
Items that are “intangible” (I.E. tuning for performance chips or programmers) are not refundable due to the nature of the product. If you would like to start a return, please request an RMA.
Shipping
All orders processed during regular business hours (Monday - Friday) 8am - 5pm (EST). Processed orders are usually shipped within the same business day provided order details are complete, within the shipping hours (8am-3pm), and there are no issues with payment. In some cases order may not go out until the next day due to how many order come in through the day. CNC Fabrication, LLC also reserves the right to override/change the customer's choice of shipping carrier in lieu to try and get the order to the customer as soon as possible. PLEASE be sure you enter the complete and correct shipping address or your package may be delayed or potentially delivered to the wrong address. CNC Fabrication, LLC is not liable for any order/package that is delivered to an incorrect customer provided address.
FREE SHIPPING: available on select items to the Continental US (lower 48 states)could be USPS or UPS depending on shipping cost and speed; does not include overnight or express service.
PRIORITY EXPRESS SHIPPING: does not guarantee overnight. It is 1-2 day, but usually 1 day.
CUSTOM SHIPPING: If you require custom shipping solution or have any questions, please Contact Customer Service.
SHIPPING DELAYS: We will do our best to get products out the door in a timely manner, once the items are picked up by the carrier we have no control over any delays they may encounter such as weather, routing issues, equipment breakdown etc.
DAMAGED ITEMS: Items damaged in shipping must be reported to CNC Fabrication, LLC within 7 days of the delivery so we can file the necessary paperwork with the carrier. Please keep all packaging and take pictures of the damage to email us in the process for ours and the carrier's records. Please DO NOT contact the carrier directly for damage; This will significantly delay the time to process the damage claim with the carrier.
- Choosing a selection results in a full page refresh.