This CNC Fabrication main plate girdle will hold the bearing caps on your 94.5-03 7.3L Ford Powerstroke more rigid from higher torque to help prevent block twist and keep your main bearings in line.
- High strength USA made alloy steel 70,000-80,000psi yield strength
- CNC machined in house for high precision hole location
- Custom stud kit included
- Will work with your factory oil pickup tube
- Dual locator tabs for both 94.5-96 and 97-03 model years
INSTALLATION:
The longer studs are for the center holes and shorter studs are for the outer holes. Please refer to ARP installation instructions in the documents tab to proper torque specs on the studs.
NOTICE:
Before installing this plate on your engine, use a calibrated straight edge across the top of the main caps to be sure they are all the same height. Some main caps may be higher and should be surface ground to the tops of the caps are all true/in-line so as to no distort the plate. Majority of the time the caps are very close to being true across. The oil pickup tubes can vary quite a bit on how they were bent from the factory, so you might have to adjust it.
If you are unsure of installing yourself, seek out a competent and qualified technician to install this kit.
ARP STUD INSTALL INSTRUCTIONS FOR 7.3 CNC FAB PLATE GIRDLE
Brand: CNC FabricationManufacturer Part Number: 421001Length (in): 4Width (in): 25Height (in): 13Weight (lbs): 21
Returns Policy
Return shipping is the sole responsibility of the customer.
CNC Fabrication, LLC™ will accept items to be returned or exchanged, that are in new, unopened, unworn, unaltered, and free of damages by the customer. Items returned will incur a minimum 10% restocking fee (depending on item). We will allow a full refund for "store credit" if a customer does not want to incur the minimum 10% restock fee.
Items MUST be returned with a copy of the original receipt and in the original packaging it was received in by the customer, if not, this may significantly delay the time to process the refund.
Restocking fee may be more if customer has caused any type of damage to the product, packaging, or missing parts that prohibits the product to be re-sold “as new” to the next potential customer. If the product is returned via a shipper, it is the responsibility of the original purchaser to be sure the product is secure in the return package to avoid any potential damage. If damage occurs, the original purchaser may not receive any refund whatsoever.
**No returns or refunds will be accepted on electrical items or special order items**
Items that are “intangible” (I.E. tuning for performance chips or programmers) are not refundable due to the nature of the product. If you would like to start a return, please request an RMA.
Shipping
All orders processed during regular business hours (Monday - Friday) 8am - 5pm (EST). Processed orders are usually shipped within the same business day provided order details are complete, within the shipping hours (8am-3pm), and there are no issues with payment. In some cases order may not go out until the next day due to how many order come in through the day. CNC Fabrication, LLC also reserves the right to override/change the customer's choice of shipping carrier in lieu to try and get the order to the customer as soon as possible. PLEASE be sure you enter the complete and correct shipping address or your package may be delayed or potentially delivered to the wrong address. CNC Fabrication, LLC is not liable for any order/package that is delivered to an incorrect customer provided address.
FREE SHIPPING: available on select items to the Continental US (lower 48 states)could be USPS or UPS depending on shipping cost and speed; does not include overnight or express service.
PRIORITY EXPRESS SHIPPING: does not guarantee overnight. It is 1-2 day, but usually 1 day.
CUSTOM SHIPPING: If you require custom shipping solution or have any questions, please Contact Customer Service.
SHIPPING DELAYS: We will do our best to get products out the door in a timely manner, once the items are picked up by the carrier we have no control over any delays they may encounter such as weather, routing issues, equipment breakdown etc.
DAMAGED ITEMS: Items damaged in shipping must be reported to CNC Fabrication, LLC within 7 days of the delivery so we can file the necessary paperwork with the carrier. Please keep all packaging and take pictures of the damage to email us in the process for ours and the carrier's records. Please DO NOT contact the carrier directly for damage; This will significantly delay the time to process the damage claim with the carrier.
- Choosing a selection results in a full page refresh.