45 results
Sort by:
- Featured
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
-
Vendor:CNC Fabrication
98.5-03 7.3L CNC Fab HPOP Line Kit w/ HPx - 424004
Replace your 98.5-03 7.3L Powerstroke high-mileage OEM High Pressure Oil Pump lines with the #1 selling CNC Fabrication™ upgraded HPOP lines! These lines are to replace the typical high mileage expensive leaky OEM HPOP lines that have the STC fittings. Kit comes with passenger,...- $224.95
- $224.95
- Unit price
- / per
-
Vendor:CNC Fabrication
96-03 7.3L CNC Fab Stage 1 HPOP - 424017
Upgrade your 96-03 7.3L Powerstroke with this rebuilt Stage 1 High Pressure Oil Pump from CNC Fabrication, LLC. Typically these pumps will produce 5.1-5.6gpm which is usually enough volume to sustain 230/100 hybrid injectors. We do not list this pump as an aftermarket high...- $579.95
- $579.95
- Unit price
- / per
-
Vendor:CNC Fabrication
98.5-03 CNC Fab 7.3L HPOP Line Kit - 424003
Replace your 98.5-03 7.3L Powerstroke high-mileage OEM High Pressure Oil Pump lines with the #1 selling CNC Fabrication™ upgraded HPOP lines! These passenger and driver side lines are to replace the typical high mileage expensive leaky OEM HPOP lines that have the STC fittings....- $169.95
- $169.95
- Unit price
- / per
-
Vendor:CNC Fabrication
96-03 7.3L CNC Fab Stage 2 HPOP - 424018
Upgrade your 96-03 7.3L Powerstroke with this rebuilt Stage 2 High Pressure Oil Pump from CNC Fabrication, LLC. Typically this pump will flow 30% more than a brand new Bosch 99.5-03 pump, which is plenty enough volume to sustain 250/100 hybrid injectors. 250/200's can...- $749.95
- $749.95
- Unit price
- / per
-
Vendor:CNC Fabrication
03-04 6.0L CNC Fab Stage 1 HPOP - 424019
Upgrade your 03-04 6.0L Ford Powerstroke with this Stage 1 High Pressure Oil Pump from CNC Fabrication, LLC. MODEL/YEAR(S): 2003-2004 ENGINE SIZE: 6.0L Outfitted with a new upgraded housing that cures the infamous "back plate wear-out" with the original design. Typically, these pumps will support...- $699.95
- $699.95
- Unit price
- / per
-
Vendor:CNC Fabrication
94.5-97 7.3L CNC Fab HPOP Line Kit w/ Crossover - 424002
Replace your 94.5-97 7.3L Powerstroke high-mileage OEM High Pressure Oil Pump lines with the #1 selling CNC Fabrication™ upgraded HPOP lines! These lines are to replace the typical high mileage expensive leaky OEM HPOP lines. Advanced HPOP lines with DuPont Teflon™ lining. Burst pressure...- $224.95
- $224.95
- Unit price
- / per
-
Vendor:CNC Fabrication
94.5-97 7.3L CNC Fab OBS HPOP Line Kit - 424001
Replace your driver and passenger side 94.5-97 OBS 7.3L Powerstroke high-mileage OEM High Pressure Oil Pump lines with a CNC Fabrication™ upgrade! Advanced HPOP lines with DuPont Teflon™ lining New Genuine Brennan™ Hydraulic fittings Burst pressure rating of 16,000psi and working temperature rating of...- $169.95
- $169.95
- Unit price
- / per
-
Vendor:CNC Fabrication
94.5-03 7.3L CNC Fab HPOP Line O-Ring Kit - 424013
94.5-03 7.3L Powerstroke HPOP line o-ring replacement kit. Shipping: Item ships USPS when Free Shipping is selected. If UPS is required please select UPS at checkout for the other shipping options. Here's the solution you were looking for to re-seal your CNC Fabrication 7.3L...- $12.95
- $12.95
- Unit price
- / per
-
Vendor:CNC Fabrication
94.5-95 7.3L CNC Fab Stage 1 HPOP - 424015
Upgrade your 94.5-95 7.3L Powerstroke with this rebuilt Stage 2 High Pressure Oil Pump from CNC Fabrication, LLC. Typically, these pumps will produce 5.1-5.6gpm which is usually enough volume to sustain 230/100 hybrid injectors. We do not list this pump as an aftermarket high...- $579.95
- $579.95
- Unit price
- / per
-
Vendor:CNC Fabrication
94.5-95 7.3L CNC Fab Stage 2 HPOP - 424016
Upgrade your 94.5-95 7.3L Powerstroke with this rebuilt Stage 2 High Pressure Oil Pump from CNC Fabrication, LLC. Typically this pump will flow 30% more than a brand new Bosch 99.5-03 pump, which is plenty enough volume to sustain 250/100 hybrid injectors. 250/200's can...- $749.95
- $749.95
- Unit price
- / per
-
Vendor:CNC Fabrication
94.5-03 7.3L Powerstroke CNC Fab Stage 1 Valve Spring Kit
CNC FABRICATION™ 94.5-03 STAGE 1 VALVE SPRING KIT MODEL/YEAR(S): 1994.5-2003 ENGINE SIZE: 7.3L Great mild upgrade over stock valve springs for around for under a 500hp engine. OD: 1.354" ID: 0.940" SEAT LOAD: 119LBS @1.800" OPEN LOAD: 312LBS @1.350" COIL BIND: 1.280" RATE: 458LBS/IN...- From $124.95
- From $124.95
- Unit price
- / per
-
Vendor:CNC Fabrication
94.5-03 7.3L CNC Fab Driver HPOP Line With Fittings- 424009
This line is a replacement driver side line for the 94.5 through '03. Fittings are the same style as those used on the 94.5-97 powerstroke engines. All new Genuine Brennan™ fittings DuPont Teflon™ lining just like OEM Burst pressure rating of 16,000psi Working temperature...- $89.95
- $89.95
- Unit price
- / per
-
Vendor:CNC Fabrication
03-04 6.0L CNC Fab Stage 2 HPOP - 424020
Upgrade your 03-04 6.0L Powerstroke with this Stage 2 High Pressure Oil Pump from CNC Fabrication, LLC MODEL/YEAR(S): 2003-2004 ENGINE SIZE: 6.0L This is our mild performance pump and will outperform our Stage 1 pump by around 30% flow volume. Outfitted with a new...- $949.95
- $949.95
- Unit price
- / per
-
Vendor:Ford/Motorcraft
96-98.5 (early 99) 7.3L Ford HPOP Reservoir Gasket - F6TZ6619AA
- $16.43
- $16.43
- Unit price
- / per
-
Vendor:CNC Fabrication
98.5-03 7.3L Replacement Fitting Pack for CNC Fab HPO 2 Line Kit - 424024
98.5-03 7.3L Replacement Fitting Pack for CNC Fabrication HPO 2 Line Kit - 424024 All new Brennan™ Hydraulic fittings High quality Viton™ o-rings ***Free shipping is USPS First Class when ordered alone.*** DOWNLOADABLE INSTALL INSTRUCTIONS INSTALLATION: Disconnect the battery grounds before installation to avoid...- $34.95
- $34.95
- Unit price
- / per
-
Vendor:Ford/Motorcraft
94.5-03 7.3L Ford OEM Injector cup - F4TZ9F538A
Genuine Ford Original Equipment Manufacturer 94.5-2003 7.3L Ford Powerstroke injector cup/sleeve. You will receive an actual Ford part, unlike some of our competitors that advertise OEM parts but send aftermarket. You can also add sleeve retainer to this purchase from the drop-down menu.- $16.25
- $16.25
- Unit price
- / per
-
Vendor:CNC Fabrication
94.5-03 7.3L CNC Fab Main Plate Girdle - 421001
This CNC Fabrication main plate girdle will hold the bearing caps on your 94.5-03 7.3L Ford Powerstroke more rigid from higher torque to help prevent block twist and keep your main bearings in line. High strength USA made alloy steel 70,000-80,000psi yield strength CNC...- $769.95
- $769.95
- Unit price
- / per
-
Vendor:Alliant Power
94.5-03 7.3L Alliant Power Injector Cup Set of 8 - AP63411-SET
Product Description: HEUI Injector Sleeve-Brass Complete set of 8 injector cups. OEM Numbers: 1814376C1 qty-8 Make Model Years Engine Model Notes Notes Ford F-250 1994 to 2003 Ford 7.3L Power Stroke F Series, Excursion, E Series Ford F-350 1994 to 2003 Ford 7.3L Power...- $143.00
- $143.00
- Unit price
- / per
-
Vendor:CNC Fabrication
96-03 7.3L CNC Fab HPOP System Re-seal Kit - 424014
Here's the solution you were looking for to re-seal your 7.3L HPOP and line fittings. This will re-seal all 6 fittings on our 3 line HPOP Line kits along with the rear construction port and passenger side construction port on the pump. This kit...- From $32.95
- From $32.95
- Unit price
- / per
-
Vendor:CNC Fabrication
94.5-03 7.3L CNC Fab Stage 2 Beehive Valve Spring Kit - 42100X
CNC Fabrication™ 94.5-03 Stage 2 Beehine Valve Spring Kit MODEL/YEAR(S): 1994.5-2003 ENGINE SIZE: 7.3L Great upgrade over our stage 1 valve springs for over a 500hp engine. Includes new spring retainers and keepers. **YOU WILL NEED TO MEASURE AND SHIM FOR INSTALL HEIGHT.** Install...- From $384.95
- From $384.95
- Unit price
- / per