Correct pushrod length will allow you to keep stock rocker geometry, allowing the friction surface of the rocker arm to ride the correct contact area of the valve bridge. If you have made any changes to the engine requiring custom length pushrods, we sell...

Upgrade your 03-07 6.0L Ford Powerstroke with a set of these Manton extreme duty billet tool steel valve bridges from CNC Fabrication.  Correct pushrod length will allow you to keep stock rocker geometry, allowing the friction surface of the rocker arm to ride the...

COMP CAMS .015” VALVE SPRING SHIMS 4737-16 THESE .015? THICK VALVE SPRING SHIMS WITH 1.437? OUTSIDE DIAMETER AND .645? INSIDE DIAMETER ARE USED TO EQUALIZE THE INSTALLED HEIGHT OF VALVE SPRINGS. MADE FROM THE HIGHEST QUALITY SHIM STOCK, THEY ARE HEAT TREATED TO STAND...

COMP CAMS .030" VALVE SPRING SHIMS 4743-16 THESE .030" THICK VALVE SPRING SHIMS WITH 1.437" OUTSIDE DIAMETER AND .645" INSIDE DIAMETER ARE USED TO EQUALIZE THE INSTALLED HEIGHT OF VALVE SPRINGS. MADE FROM THE HIGHEST QUALITY SHIM STOCK, THEY ARE HEAT TREATED TO STAND...

COMP CAMS SINGLE VALVE SPRINGS - 910-16 Single inner valve springs from Comp Cams allow you to build the perfect spring assembly for your application. The valve spring creation process is far more involved than most people realize. By selecting the right metal stock...

**NEW** Garrett Factory replacement turbo for 2011-2014 F250/350 pickups.   Factory cross-reference- BC3Z6K682C, BC3Q9G438AM, BC3Z6K682EA   FREE SHIPPING IN THE LOWER 48

**NEW** Garrett Factory replacement turbo for 2015-2016 F250/350 pickups.   Factory cross-reference- FC3Z6K682A, FC3Z6K682B   FREE SHIPPING IN THE LOWER 48

BorgWarner S300SX3 SX .91 A/R T4 68/76mm .91 A/R T-4 Inlet For 68mm Turbine Volute, Twin Scroll 3.5” V-Band (4.21 marmon) Outlet **This turbine housing is for use with the S300 turbo with an 68mm turbine.**  

Borg Warner S364.5 SX-E 8776 64.5/68 SUPERCORE: 360 degree Thrust Bearing Integrated Speed Sensor Port Forged Mill Compressor Wheel Pre-Machined Boost Port Optimized Compressor Stage Aerodynamics Comp Wheel Inducer (mm): 64.50 Turbine Wheel OD (mm): 87.37 Turbine Wheel Exducer (mm): 68.00 Oil feed port is 1/4NPT...

BorgWarner S300SX3 SX .83 A/R T4 68/76mm .83 A/R T-4 Inlet For 68mm Turbine Volute, Twin Scroll 3.5” V-Band (4.21 marmon) Outlet **This turbine housing is for use with the S300 turbo with an 68mm turbine.**  

This turbo is for the 2004-2005 6.0L Powerstroke Garrett part number- 743250-5024S Product Highlights Compressor Wheel Garrett’s compressor wheel testing dictates 1 million cycles prior to introduction. This testing prevents issues such as low cycle fatigue (hub burst/ wheel splitting in half). A wheel may...

BorgWarner S400 .90 A/R Turbine Housing: .90 A/R T-4 Inlet For 87mm Turbine Volute, Twin Scroll 3.5” V-Band (4.21 marmon) Outlet ****This turbine housing is for use with the S472, S475, S476, S480, S482 turbo with an 87mm turbine.****  

BorgWarner S400 1.10 A/R Turbine Housing: 1.10 A/R T-4 Inlet For 87mm Turbine Volute, Twin Scroll 3.5” V-Band (4.21 marmon) Outlet ****This turbine housing is for use with the S472, s475, s476, s480, s482 turbo with an 87mm turbine.****  

BorgWarner S400 1.25 A/R Turbine Housing: 1.25 A/R T-4 Inlet For 87mm Turbine, S472, s475, s476, s480, s482 Volute, Twin Scroll 3.5” V-Band (4.21 marmon) Outlet ****This turbine housing is for use with the S472, s475, s476, s480, s482 turbos with an 87mm turbine.****  

BorgWarner S467.7FMW 1.25 A/R Turbine Housing: 1.25 A/R T-4 Inlet For 83mm Turbine, S467.7 Volute, Twin Scroll 3.5” V-Band (4.21 marmon) Outlet ****This turbine housing is for use with the S467.7 turbo with an 83mm turbine.****  

BorgWarner S467.7FMW 1.10 A/R Turbine Housing: 1.10 A/R T-4 Inlet For 83mm Turbine, S467.7 Volute, Twin Scroll 3.5” V-Band (4.21 marmon) Outlet ****This turbine housing is for use with the S467.7 turbo with an 83mm turbine.****  

BorgWarner S467.7FMW 1.00 A/R Turbine Housing: 1.00 A/R T-4 Inlet For 83mm Turbine, S467.7 Volute, Twin Scroll 3.5” V-Band (4.21 marmon) Outlet ****This turbine housing is for use with the S467.7 turbo with an 83mm turbine.****  

BorgWarner S467.7FMW .90 A/R Turbine Housing: .90 A/R T-4 Inlet For 83mm Turbine, S467.7 Volute, Twin Flow 3.5” V-Band (4.21 marmon) Outlet ****This turbine housing is for use with the S467.7 turbo with an 83mm turbine.****  

BorgWarner S300 1.0 A/R Turbine Housing: 1.0 A/R T-4 Inlet For 80mm Turbine, S362, s364.5, S366, S369 Volute, Twin Flow 3.5” V-Band (4.21 marmon) Outlet ****This turbine housing is for use with any s300 turbo supercore with an 80mm turbine.****  

BorgWarner S300 .91 A/R Turbine Housing: .91 A/R T-4 Inlet For 80mm Turbine, S362, s364.5, S366, S369 Volute, Twin Flow 3.5” V-Band (4.21 marmon) Outlet ****This turbine housing is for use with any s300 turbo supercore with an 80mm turbine.****