This is a great replacement plenum gasket for your 7.3L Powerstroke for superior sealing without the RTV mess. 8 bolt gasket also available HERE.     These will fit your 94.5-95 if someone has swapped the cylinder heads to the 96 and newer 10 bolt...

CNC Fabrication Upgraded Inter-cooler hose and clamp kit for late 1999 through 2003 7.3L Powerstroke. Features: 5 layer aramid reinforced silicone for high temp rating Rated to 180psi Stainless Steel American made T-bolts clamps Reinforcement rings just like factory Direct replacement of factory boots...

Installing these 99.5-03 7.3L Ford Powerstroke CNC Fabrication bushings will help keep you from crushing/distorting the factory stamped sheet metal intake plenums when tightening down your CAC boots.   Includes 2 bushings, one for the passenger side and one for the driver side plenums. ...

These billet intake plenums are a nice upgrade over the stock flimsy stamped sheet metal and will not deform the center inlet port when installing your CAC boot clamps. Features: High strength 6061-T6511 aircraft aluminum Bolt/nut kit included Tube of Permatex Ultra Gray RTV...

Installing these 94.5 - Early 99 bushings will help keep you from crushing/distorting the factory stamped sheet metal intake plenums when tightening down your CAC boots.  Includes 2 bushings, one for the passenger side and one for the driver side plenums.  Shipping: ***Free shipping is...

MAXIMUM PERFORMANCE Our cold air intake for the 1998-2003 Ford Powerstroke 7.3L was engineered to minimize air restriction and flows 53.66% better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat.  PROTECT...

MAXIMUM PERFORMANCE Our cold air intake for the 1998-2003 Ford Powerstroke 7.3L was engineered to minimize air restriction and flows 53.66% better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat. PROTECT...

Upgrade your 94.5-95 7.3L Ford Powerstroke with these billet intake plenums from CNC Fabrication.  These are a nice upgrade over the stock flimsy stamped sheet metal and will not deform the center inlet port when installing your CAC boot clamps. Features: 8 Bolt design...

Upgrade your 2008-2010 6.4L Ford Powerstroke with a set of CNC Fabrication intercooler boots.  Features: 5 layer aramid reinforced silicone for high temp rating Rated to 180psi Stainless Steel American made T-bolts clamps Reinforcement rings for extra support Direct replacement of factory boots Includes:...

GENUINE FORD 99.5-03 7.3L CCV to TURBO INTAKE HOSE- F81Z9C681BA This is a factory replacement for 99.5-03 stock turbo pickups.  It will fit 94.5-97 stock turbo applications with the plastic CCV adapter. If you have the metal CCV adapter or orange hose, you will...

17-19 6.7L S&B Filters Intake replacement filter - KF-1063 S&B Filters KF-1063 Replacement Filter for your 17-19 6.7L Ford Powerstroke S&B Cold Air Intake System. This innovative filter features a full round inlet radius that provides for a smooth transition while allowing for a...

Features & Details: Powder Coating can take up to 3 weeks before it ships 46% More AIR FLOW!!! Only a 2% difference from front to rear cylinders in air flow!! Fully cast design 100% Designed and Made in the USA Custom cast bungs on...

MAXIMUM PERFORMANCE Our cold air intake for the Ford 6.7L Powerstroke was engineered to minimize air restriction and flow better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat. THE SOUND OF PERFORMANCE...

MAXIMUM PERFORMANCE Our cold air intake for the 2011-2016 Ford Powerstroke 6.7L was engineered to minimize air restriction and flows 36.98% better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat. PROTECT...

This genuine Ford OEM intercooler pipe adapter connects your turbo to the hot side intercooler pipe. Optimizing airflow and performance for your 2004.5-2007 6.0L Powerstroke turbo diesel engine. Made for Ford Superduty trucks, this adapter guarantees a secure and efficient connection. Upgrade your charge...

Provides a superior fit while giving it an aggressive look that will make you want to pop the hood and show it off!  Built with a 1-piece box, this intake system features an oversized snorkel to inhale more cold air.  The cooler the air,...

17-19 6.7L S&B Filters Intake replacement filter - KF-1063 S&B Filters KF-1063 Replacement Filter for your 17-19 6.7L Ford Powerstroke S&B Cold Air Intake System. This innovative filter features a full round inlet radius that provides for a smooth transition while allowing for a...

MAXIMUM PERFORMANCE Our cold air intake for the Ford 6.7L Powerstroke was engineered to minimize air restriction and flow better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat. THE SOUND OF PERFORMANCE...

MAXIMUM PERFORMANCE Our cold air intake for the 2017-2019 Ford Powerstroke 6.7L was engineered to minimize air restriction and flows 57.30% better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat. This...

MAXIMUM PERFORMANCE Our cold air intake for the 2017-2019 Ford Powerstroke 6.7L was engineered to minimize air restriction and flows 57.30% better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat. This...