S&B Silicone Body Mounts replace the old, worn body mounts on your truck and are a direct fit. Built from a premium silicone construction, the S&B Body Mounts are built to last a lifetime and will help isolate the harsh road vibrations.   FEATURES:...

Edge Products replacement cable connecting OBDII to HDMI for the CS2 CTS2 CTS3  Features: Replacement for OBDII to HDMI cable Works with CTS2/CTS3/Trinity 2/Dashpaq Plus/Traildash3 OBDII connector snaps in place HDMI side connects to device

FEATURES: Features vary for each vehicle and are not available on all vehicles Livewire TS+ features a full color 4" touch screen display with built-in ambient light sensor for automatic brightness adjustment day & night. Switch On-The-Fly*:  Change power levels on the fly while...

The EAS Temperature Sensor is a -40-deg F to 300-deg F 1/8-inch NPT supplied with the connectors to plug directly into Edges Universal Sensor Input System. Using Edges Temperature Sensor you can monitor Transmission Temp., Differential/Axle Oil Temp., Oil Temp., Engine Coolant Temp., Air...

The Edge EAS Street Diesel Kit 98623 is the ultimate plug-in accessory upgrade for your CTS3 monitor, giving you the tools to track and protect your diesel like never before. This kit includes an EGT probe and two 0-100psi pressure sensors, allowing you to...

** TL-10535 uses the Ford Sterling 10.5 Limited Slip Differential case and Side Gears ** The Ford Sterling 10.5 LSD Case can be swapped into any Ford Sterling 10.5 or 10.25 Axle Housing For suitable Sterling 10.5 LSD Case swaps look for the following...

MAXIMUM PERFORMANCE Our cold air intake for the 2011-2016 Ford Powerstroke 6.7L was engineered to minimize air restriction and flows 36.98% better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat. PROTECT...

A relentless commitment to research and design, the use of quality materials, and an uncompromising approach to manufacturing have all contributed to the Air Locker’s® success in over 100 countries worldwide. Designed and manufactured in Australia, you can trust ARB Air Lockers® for traction...

FASS Fuel Systems Diesel Fuel Titanium Series Electric Heater Kit (HK-1001) Part No: HK-1001 Our Titanium Series Electric Heater Kits are an upgrade for FASS Systems being used in extremely cold climates. Each FASS Titanium Series pump has 2 ports for electric heaters which...

Proper wiring is crucial to the performance and longevity of your fuel system.  These heavy-duty replacements include a relay and provide the correct current to prevent drop-off that’s common with OE wiring. FASS Fuel Systems – Fuel System Wiring Harnesses Manufacturer’s Part Number:  WH-1006-3R Part Type:  Fuel...

BorgWarner S467.7FMW .90 A/R Turbine Housing: .90 A/R T-4 Inlet For 83mm Turbine, S467.7 Volute, Twin Flow 3.5” V-Band (4.21 marmon) Outlet ****This turbine housing is for use with the S467.7 turbo with an 83mm turbine.****  

BorgWarner S363SX-E Key Turbo Features: 360 degree Thrust Bearing Integrated Speed Sensor Port Forged Mill Compressor Wheel Pre-Machined Boost Port Optimized Compressor Stage Aerodynamics Comp Wheel OD (in): 3.44 Comp Wheel Inducer (in): 2.6 Comp Wheel Inducer (mm): 62.99 Turbine Wheel OD (mm): 79.76 Turbine Wheel Exducer (in): 2.89...

Pump Features: Compatible with gasoline, diesel, methanol, and ethanol High efficiency sling vane positive displacement pump Special housing shape for extremely quite operation and steady pressure Carbon 9-vane construction with pressure balanced rotor for high reliability Backed by a limited lifetime warranty Motor Features:...

BorgWarner S400 SX-E S472FMW Features: Twin hydrodynamic journal bearings Extended Tip Technology Compressor Wheel Twin Scroll Turbine Housing Adjustable compressor and turbine housing orientation 360 degree Thrust Bearing Comp Wheel OD (mm): 96 Comp Wheel Inducer (mm): 72 Turbine Wheel OD (mm): 87 Oil feed...

FASS Fuel Systems Filter Pack Part No: Filter Pack Perfect for the shop or keeping your garage stocked, each FASS Fuel Filter Pack contains two (2)  (XWS-3002) Extreme Water Separators and two (2) (PF-3001) Particulate Filters! Designed with convenience in mind, our new filter...

FASS Fuel Filter Pack – XL Part No: FP3000XL Perfect for the shop or keeping your garage stocked, each FASS Fuel Filter Pack contains one (1)  (XWS-3002XL) Extreme Water Separator and one (1) (PF-3001XL) Particulate Filter! Designed with convenience in mind, our new filter...

Tired of having to replace auto locking hubs or having to get out and engage manual hubs on your 2005+ Superduty with the Dana 60 or Dana Super 60 35 spline front axle? Here is a solution for you off-road and race guys to...

AirDog® II-5G Fuel Air Separation System Pureflow AirDog II-5G A7SABF590 DF-165-5G Air/Fuel Separation System is the newest generation in fuel delivery systems for your 2017+ Ford 6.7L Powerstroke. The 5G is engineered to be the longest lasting, most efficient, and quietest lift pump system...

      COLD SIDE INTERCOOLER PIPE FOR 2011-2016 FORD POWERSTROKE 6.7L Our 3.50” diameter polished aluminum intercooler pipe is larger than stock and is less restrictive. Less restriction means more airflow, and more airflow equals better performance. Most importantly, this intercooler pipe replaces...

FUELAB® 515 Series Fuel Pressure Regulators are designed with performance and flexibility in mind. They accept port style and non-port style union fittings without interference. Several configurations are available, applications as low as 1 PSID to fuel injected applications up to 125 PSID. The...