BorgWarner S300 .88 A/R Turbine Housing: .88 A/R T-4 Inlet For 80mm Turbine, S362, s364.5, S366, S369 Open Flow Volute 3.5” V-Band (4.21 marmon) Outlet ****This turbine housing is for use with any s300 turbo supercore with an 80mm turbine.****  

BorgWarner S366SX-E Key Turbo Features: 360 degree Thrust Bearing Integrated Speed Sensor Port Forged Mill Compressor Wheel Pre-Machined Boost Port Optimized Compressor Stage Aerodynamics Comp Wheel OD (in): 3.60 Comp Wheel Inducer (in): 2.6 Comp Wheel Inducer (mm): 66.11 Turbine Wheel OD (mm): 79.76 Turbine Wheel Exducer (in): 2.89...

BorgWarner S369SX-E Key Turbo Features: 360 degree Thrust Bearing Integrated Speed Sensor Port Forged Mill Compressor Wheel Pre-Machined Boost Port Optimized Compressor Stage Aerodynamics Comp Wheel OD (in): 3.60 Comp Wheel Inducer (in): 2.72 Comp Wheel Inducer (mm): 69 Turbine Wheel OD (mm): 79.76 Turbine Wheel Exducer (in): 2.89...

Pump Features: Compatible with gasoline, diesel, methanol, and ethanol High efficiency sling vane positive displacement pump Special housing shape for extremely quite operation and steady pressure Carbon 9-vane construction with pressure balanced rotor for high reliability Backed by a limited lifetime warranty Motor Features:...

Pump Features: Compatible with gasoline, diesel, methanol, and ethanol High efficiency sling vane positive displacement pump Special housing shape for extremely quite operation and steady pressure Carbon 9-vane construction with pressure balanced rotor for high reliability Backed by a limited lifetime warranty Motor Features:...

Pump Features: Compatible with gasoline, diesel, methanol, and ethanol High efficiency sling vane positive displacement pump Special housing shape for extremely quite operation and steady pressure Carbon 9-vane construction with pressure balanced rotor for high reliability Backed by a limited lifetime warranty Motor Features:...

Pump Features: Compatible with gasoline, diesel, methanol, and ethanol High efficiency sling vane positive displacement pump Special housing shape for extremely quite operation and steady pressure Carbon 9-vane construction with pressure balanced rotor for high reliability Backed by a limited lifetime warranty Motor Features:...

Pump Features: Compatible with gasoline, diesel, methanol, and ethanol High efficiency sling vane positive displacement pump Special housing shape for extremely quite operation and steady pressure Carbon 9-vane construction with pressure balanced rotor for high reliability Backed by a limited lifetime warranty Motor Features:...

The BulletProof FICM is an upgraded power supply which is now available in both a 4-phase or 6-phase version. The BulletProof FICM also comes with an all-billet aluminum housing for improved heat dissipation and an updated look. The 4- and 6-phase versions of the...

BD-POWER 03-07 6.0L POWERSTROKE 58v FICM - 1059700-A BD's 58-volt Ford Injection Control Module (FICM) provides quicker, more affirmative starts in both cold and warm weather over the OEM versions. All applicable critical components voltage and temperature ranges have been increased which maximizes current...

THE PROBLEM The 2000-2010 Ford F350, F450 & F550 Cab and Chassis trucks are equipped with an after-axle 40 gallon fuel tank. These OEM tanks have a failure prone coating inside the tank. Once the coating becomes unstable inside the tank, the laminate peels...

FASS Fuel Systems XWS-3002 Extreme Water Separator (XWS-3002) Part No: XWS-3002 Our New more efficient Extreme Water Separator is rated @ 2 microns absolute. The reason our water separator no longer has a drain is because the filter element itself traps the water. The new...

FASS Fuel Systems PF-3001 Particulate Filter (PF-3001) Part No: PF-3001 Our New Particulate Filter is rated @ 144 microns. The 144 Micron Particulate Filter on the suction side will drastically reduce cavitation, increase flow properties, lower the sound output of the FASS System, and removes...

CSF - OEM+ Replacement Intercooler (6013) | 03-07 6.0L The CSF 6013 OEM+ Replacement Intercooler is manufactured from the highest quality components to provide you with the best aftermarket OE replacement intercooler available for your 2003-2007 Ford 6.0L Powerstroke. CSF is an ISO certified...

CSF - HD Replacement Intercooler (7106) | 03-07 6.0L The CSF 7107 Heavy-Duty Intercooler is manufactured to provide durability and performance on your 2003-2007 Ford 6.0L Powerstroke. This heavy duty Intercooler is built using a bar and plate design with industry leading testing methods...

Revolution Heavy Duty Dana 80 Diff Covers are fabricated from 3/8 inch thick steel rings and 1/4 inch thick formed steel bodies. American Made and Ready For The Rocks! Details: Fits Dana 80 Differential Ultra Heavy Duty Cover Main Body Stamped Out Of 0.250...

Revolution Heavy Duty Ford 10.25 inch Diff Covers are fabricated from 3/8 inch thick steel rings and 1/4 inch thick formed steel bodies. American Made and Ready For The Rocks!Details: Fits Ford 10.25 Inch and 10.5 Inch Differential Ultra Heavy Duty Cover Main Body...

Revolution Heavy Duty Dana 60 Super Duty Front Diff Covers are fabricated from 3/8 inch thick steel rings and 1/4 inch thick formed steel bodies. American Made and Ready For The Rocks!Details: Fits Ford Super Duty Dana 60 Front Differential Ultra Heavy Duty Cover...

Tired of having to replace auto locking hubs or having to get out and engage manual hubs on your Dana 60? Here is a solution for you off-road and race guys to have a stronger assembly without the expense of a free spin hub...

S&B Silicone Body Mounts replace the old, worn body mounts on your truck and are a direct fit. Built from a premium silicone construction, the S&B Body Mounts are built to last a lifetime and will help isolate the harsh road vibrations.   FEATURES:...