Commonly called a Stage 3, these "Hot Street" 238cc hybrid injectors will typically produce around 500-550hp with proper supporting modifications depending on the year of your truck.  80% nozzles will give better towing capabilities and run cleaner, 100% nozzles will give a more top end power, more low end torque (good balance of work and fun), 200% nozzles will give the most power but expect EGT's to be higher.  These are by far the most popular sized injector to daily drive and give a Camaro a run for it's money.  Mainly because a T4 turbo mount is not "necessary", nor are billet rods and a plate girdle.

**See Suggested Modifications tab for turbo, fuel, and hpop upgrades**

Features:

• Decent for towing, or just wanting a sizeable power increase
• New 80%, 100%, or 200% over nozzles
• New Tungsten Coated Plungers and Barrels
• New o-rings
• New springs
• Better than OE specifications
• We do NOT use shims, these injectors are machined to set proper armature clearance
• Each set of injectors will come with flow sheet test results
• Tested on the newest Hartridge flow bench using the latest injector technology
• Free Ground Shipping with a return label

**See Core Policy >>> Here <<<**

If you are sending in your cores first, please click the "Documents" tab and print off the form to send it in with your injectors. If you have extra cores, please see the other form for store credit or reimbursement options.

Warranty:

Covered by CNC Fabrication's 2 year unlimited mileage replacement warranty.  Warranty covers any damages done during shipping, prior to installation, and if all installation steps were followed.  Warranty VOID if damage is done due to improper care of the purchaser's vehicle, improper fuel, etc.  Warranties are non-transferable, and only offered to the original purchaser.