Additional Images

94-97 7.3L CNC Fab Passenger HPOP Line - 7.3-OBS-HPOP-PA

7.3-OBS-HPOP-PA
CNC Fabrication 94-97 REPLACEMENT PASSENGER SIDE HPOP LINE
Pricing: $79.95

Customize Your Item

- -
 * required
Qty:
Free Shipping!

Description

This line is a replacement passenger side line for the '94.5 through '97.

If you have efuel you can also use the SD passenger line for a cleaner install.

  • All new Genuine Parker Triplelok™ fittings 
  • DuPont Teflon™ lining just like OEM
  • Burst pressure rating of 16,000psi
  • Working temperature rating of 400*F
  • Nominal working pressure is 5000psi
  • High quality Viton™ o-rings
  • MADE IN THE USA IN OUR SHOP

We know it may be cheaper for those wanting to save some money and have a local hydraulic shop make lines, but in our 20yrs experience, it is not advisable due to the amount of thermal cycling and engine sees.  Normal hydraulic is meant for normal hydraulic use, NOT on the engines. See pictures of what happens to our competitor lines. Dry rot and blistering of the hose. 

 

INSTALLATION:  

Disconnect the battery grounds before installation to avoid accidentally arc'ing the line on the glow plug relay or the alternator charging lug. Use pictures from the product webpage for routing example. The fittings are marked with numbers to label install location (see below for reference). After installation, be sure there is no other lines/wires that are touching the lines that could potentially rub through and damage either the HPOP line or the other line that may be touching it.  Use a small section of wire loom protector or a larger piece or rubber hose to wrap around the contact point.  Many will remove or bend the engine eyelet on the driver side as a precaution, but it is not necessary.  Sealant is not necessary, but IF you choose to use any, use Loctite 680 or Permatex 64000 retaining compound (green) only on the fittings installed in the HPOP.  If you are unsure of installing yourself, seek out a competent and qualified technician to install the lines.

HOSE IDENTIFICATION: SD 2 LINE-BOTH SIDES ARE SAME LENGTH. OBS 2 LINE- PASSENGER IS LONGER OF THE 2. **FOR ANY 3 LINE KIT THE SHORTEST LINE IS THE CROSSOVER HOSE.

FITTING MARKINGS: 1- FRONT PUMP PORT 2- REAR PUMP PORT 3- DRIVER HEAD 4- OBS PASSENGER HEAD 5- SD PASSENGER HEAD AND CROSSOVER **OBS driver side line fitting gets moved forward one port on the head to match SD**

Pump Fittings: 28FT/LBS • Head Fittings: 23FT/LBS • Hose Ends: 21FT/LBS *REMOVE THE SPRING CHECKS IN THE PUMP UNDER THE STOCK FITTINGS, DO NOT RE-INSTALL*

 

 

 

Details

Shipping Information

  • Item Requires Shipping
  • 1.0 lbs.
  • W3.0000” x H3.0000” x L16.0000”
  • Free Shipping!

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.