his line is a replacement passenger side line for the Early '99 through '03.

 Fittings are the same style as those used on the 94.5-97 powerstroke engines. This line can be used on 94.5-97 trucks that have efuel for a cleaner install.

• All new Genuine Parker Triplelok™ fittings 
• DuPont Teflon™ lining just like OEM
• Burst pressure rating of 16,000psi
• Working temperature rating of 400*F
• Nominal working pressure is 5000psi
• High quality Viton™ o-rings
• MADE IN THE USA IN OUR SHOP

We know it may be cheaper for those wanting to save some money and have a local hydraulic shop make lines, but in our 20yrs experience, it is not advisable due to the amount of thermal cycling and engine sees.  Normal hydraulic is meant for normal hydraulic use, NOT on the engines. See pictures of what happens to our competitor lines. Dry rot and blistering of the hose. 

NOTE:  If you are unsure of installing this line yourself, seek out a competent and qualified technician to install the lines.

Installation: 

Disconnect the battery grounds before installation to avoid accidentally arc'ing the line on the glow plug relay or the alternator charging lug. Use the pictures on this page for reference.  After installation, be sure there are no other lines/wires that are touching the lines that could potentially rub through and damage either the hpop line or the other line that may be touching it.  Use a small section of wire loom protector or a larger piece or rubber hose to wrap around the contact point.

Head fittings: 23ft/lbs • Hose ends: 21ft/lbs