EARLY 1999 7.3L
**NOTE: The High Pressure Oil lines in the picture do not come with the kit. Those are sold separately.
This kit works great from stock injectors to how ever large you want to run. It is a kit that is for the DIY person wanting to convert their truck to an electric fuel pump system. There are quite a few other shops that build quality fuel pump/filter/regulator kits that will work great with this fuel line kit. All you need is some 1/2" 100psi minimum fuel rated hose/line from the customer supplied pump assembly up to the fuel distribution block, and your good to go.
You can also build your own pump setup if you like. We recommend using a stock Superduty Bosch pump for stock to 160/30 injectors, the AEM 400lph pump for mild built trucks for above 160/30 to 250/100 injectors, or the Fuelab Prodigy pumps for competition trucks running 300cc or larger, and we also recommend using Fuelab adjustable regulators. For a more plug-n-play type fuel pump/filter setup we recommend the AirDog II 4G Fuel Pump as it has the filters and regulator built in, a lifetime warranty (as long as you turn in your receipt within 30 days of purchase), and is simple to install as all the legwork for finding fittings/adapters comes with the AirDog kit.
Click on the "Documents" tab above to download the installation instructions
IS RECOMMENDED THAT YOU USE LOCTITE 545 ON THE PIPE THREADED FITTINGS DURING INSTALL OR GAS (NG OR PROPANE) RATED TEFLON BASE PASTE. OR IF YOU ARE VERY CAREFUL, YOU CAN USE TEFLON TAPE AS LONG AS IT IS RATED FOR GAS ALSO. IT IS CRITICAL YOU DO NOT GET ANY TAPE INTO THE FUEL SYSTEM DURING INSTALL
Write the First Review!
You must login to post a review.
California Residents: Prop 65 Warning
WARNING: Cancer and Reproductive Harm