TRUCK YEARS: 1994.5-Early 99 ENGINE TYPE: 7.3L
This kit is for the DIY person wanting to convert their truck to an electric fuel pump system. Pump, regulator, and filters will need to be purchased.
**For Early '99 ONLY, select the Fuel Bowl Relocation Kit from the drop-down menu as an affordable option over a FASS or AirDog fuel pump setup that will retain your factory fuel pump**
You can also build your own pump setup if you like. We recommend using a stock Superduty Bosch pump for stock to 160/30 injectors, the AEM 400lph pump for mild built trucks for above 160/30 to 250/100 injectors, or the Fuelab Prodigy pumps for competition running 300cc or larger. We also recommend using Fuelab adjustable regulators. For a more plug-n-play type fuel pump/filter setup we recommend the AirDog II 5G Fuel Pump as it has the filters and regulator built in, a lifetime warranty (as long as you turn in your receipt within 30 days of purchase), and is simple to install. The only thing you need to do with the AirDog II 5G with an OBS is to cut off the "mini fuse tap" wire that is meant for the 99 and newer trucks to an "ATO (regular) fuse tap" for key-on power to send power to the supplied relay, and install the pump as directed by AirDog.
Click on the "Documents" tab above to download the installation instructions
WE RECOMMENDED THAT YOU USE LOCTITE 545 ON THE PIPE THREADED FITTINGS DURING INSTALL OR GAS (NG OR PROPANE) RATED TEFLON BASE PASTE. OR IF YOU ARE VERY CAREFUL, YOU CAN USE TEFLON TAPE AS LONG AS IT IS ALSO RATED FOR GAS. IT IS CRITICAL YOU DO NOT GET ANY TAPE INTO THE FUEL SYSTEM DURING INSTALL
**Looking to add an AirDog Fuel Pump? Check out this LINK!
You must login to post a review.
Write the First Review!