CNC FABRICATION 7.3L STAGE 2 HIGH PRESSURE OIL PUMP FOR MODEL YEARS 1994.5-1995

Typically this pump will flow 30% more than a brand new Bosch 99.5-03 pump, which is plenty enough volume to sustain 250/100 hybrid injectors. 250/200's can be ran with this pump, but it is not a guarantee that it will keep up in a "hot/race" tune as there are variables between injector builders on how well they build them.

This pump is more recommended for 230-250cc hybrid injectors.  Anything larger will more than likely require a larger pump setup. 

• Comes with a new gasket
• 30% more flow over 99.5-03 stock pump (10-12% more than an Adrenaline HPOP)
• All of our pumps are fitted with steel thread inserts to ensure the threads will not rip out
• Upgraded internals for more flow
• New Viton o-rings to reuse your existing fittings
• Every pump is flow bench tested to assure you no DOA pumps.
• Comes with a test flow result sheet

PLEASE SEE DOCUMENTS TAB FOR CORE RETURN FORM AND INSTRUCTIONS.

******CORES FOR 94.5-95 HPOP MUST BE THE CORRECT HOUSING TO RECIEVE FULL CREDIT. 96-03 CORES WITHOUT THE CHECK VALVE WILL BE ACCEPTED WITH A 25% REDUCTION OF CORE REFUND.

****SEE OUR CORE POLICY HERE.*****

 ***SELL US YOUR CORES***

1YR UNLIMITED MILEAGE WARRANTY

**YOU HAVE 45 DAYS FROM THE DAY THE PUMP WAS RECEIVED TO GET YOUR FULL
CORE FEE REFUNDED. THERE WILL BE A 10% REFUND REDUCTION AT 45 DAYS AND 50% REFUND REDUCTION PAST 90 DAYS UNLESS PREVIOUSLY ARRANGED WITH CNC FABRICATION. IF YOU ARE GOING TO BE BEYOND THE 45 OR 90 DAYS OR THINK YOU ARE
GOING TO BE LONGER, PLEASE EMAIL US AT [email protected] AND LET US
KNOW SO WE CAN NOTATE OUR RECORDS.