HOW TO

PROPERLY CLEAN AND RE-OIL YOUR AIR FILTER

Watch our video as Katie shows you just how easy it is to maintain your air filter step by step. 

STEP 1

REMOVE AND CLEAN

• Clean sealing area of filter and filter housing with a clean soft rag.
• Tap the filter on a hard surface to remove and loosen large paricles and debris. (A soft brush may be used to loosen large particles of debris or bugs.)
• Use S&B’s Filter Cleaner to clean the filter.
• Gently rinse out the cleaner using low pressure water.
• Let filter dry for at least 24 hours.

STEP 2

FILL AND APPLY

• Fill applicator with exact amount of oil required for your filter.
• Starting 1/2 way from base make 2-3 passes around the circumfrence of the filter in the same area.
• Repeat this process evenly spacing out the passes.

STEP 3

INSPECT AND INSTALL

• Allow oil to bleed for 20-30 minutes.
• Inspect the filter for any white areas the oil did not cover.
• With the remaining oil in the applicator apply a small amount of oil to those white areas.
• DO NOT over oil your filter.