Additional Images

7.3L 94.5-03 Injector Driver Module (IDM) 140V Modification - CNC-7.3-IDMMOD

1798--CNC-7.3-IDMMOD
This is a “SERVICE” that we take your known good IDM and modify it from the OEM voltage to 140v output.  This is "NOT" a repair, so do not send in a bad IDM.
Pricing: $150.00
Qty:

Description

7.3L FORD POWERSTROKE INJECTOR DRIVER MODULE (IDM) 140V MODIFICATION

There are many people who have completed this upgrade themselves with great success, but if you are not comfortable soldering on a pc board, then we suggest not trying this as a replacement IDM is not cheap.

If you would like to attempt this yourself, here is a nice write-up on "The Diesel Garage" forum

This modification increases throttle response by actuating the injectors much quicker, and typically will quiet down injector noise.  It has been dyno'd on a normally healthy engine to increase by as much as 20hp.  By increasing the voltage on the PC board, this also lowers the current (amps) and lessens heat throughout the under valve cover harnesses to help them last longer. Too much heat over time will cause the insulation on the wires to dry rot quicker, crack, and possibly short out if the wires come into contact with the head.

NOTE: Address to send in your IDM into is on the <<Contact Page>>

*Please include a copy of your receipt in the box so we know where to return the IDM*

 

 cnc-fabrication-logo-lc-on-white

Details

Shipping Information

  • Item Requires Shipping
  • 5.0 lbs.
  • W6.0000” x H3.0000” x L9.0000”

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.