Improve your Powerstroke Diesel performance! The patented AirDog® Air/Fuel Separation System maintains correct injection-timing and eliminates spray-pattern disruption while allowing full power stroke and complete burn. This pump will work with the 94.5-97 model year trucks with some added modifications. You will have to remove the switching valve if you have dual tanks as the switch valve cannot handle the higher fuel pressure. (NOTE: many OBS owners will typically install the fullsize Bronco rear tank (38gal) and eliminate the midship OEM tank) We also highly recommend a large draw straw or a sump to help with pump longevity.
The Pureflow AirDog II-5G A7SABF592 DF-165-5G Air/Fuel Separation System is the newest generation in fuel delivery systems for your 1999-2003 Ford 7.3L Powerstroke. The 5G is engineered to be the longest lasting, most efficient, and quietest lift pump system offered.
The AirDog II-5G features a 4-bearing motor with an intermediate shaft that reduces pump noise and improves reliability. The demand flow design allows the pump to only send the necessary amount of fuel to the engine. A dual feed design supplies fuel to both sides of the gerotor pump to decrease air bubbles and cavitation.
The AirDog II-5G utilizes a diaphragm style fuel pressure regulator allowing the pump to be boost referenced and adjusted from 7-70 PSI The 5G system features larger 3/4-16 O-ring boss inlet and outlet ports. A 7/16-20 (-4) low-flow return is used to prevent aeration in the fuel being sent to back to the tank. CNC FABRICATION,LLC is a proud distributor of Pureflow Airdog Products.
• 165 GPH Pump
• 4 Bearing Motor with Intermediate Shaft
• Larger Ports Over Previous Pumps
• Diaphragm Fuel Pressure Regulator
• Demand Flow Design
• Reduced Aeration From Low Flow Return
Be sure to fill out your lifetime warranty registration card and send it in within 30 days or you will only receive a 1 year warranty.
Comments: I am very pleased with my purchase. I am pleased with my experience dealing with CNC. I did a full fuel system build along with this pump so the install took a while, but overall it went very smoothly. So far the airdog is performing flawlessly. Install video at Living On Wheels channel https://youtu.be/TYTtQee3_u0
Reviewed by: Joe02/23/2019 01:04AM
Product ownership: Less than 3 months
Purchased from: CNC Fabrication
I am very pleased with my purchase. I am pleased with my experience dealing with CNC. I did a full fuel system build along with this pump so the install took a while, but overall it went very smoothly. So far the airdog is performing flawlessly. Install video at Living On Wheels channel https://youtu.be/TYTtQee3_u0